topic Re: DFM 4.0.1 PA -> FAS6280 8.0.2P3 in Active IQ Unified Manager Discussions

DFM 4.0.1 PA -> FAS6280 8.0.2P3

daehnrich_bsh — Thu, 05 Jun 2025 06:34:29 GMT

Hello,

i added today our new System to the DFM to monitor and collect performance data from this System.

- System is added to DFM/PA

- Login Credentials are good

- Perf Advistor Transport HTTPSOk

- dfm diag host is clean/good.

In our NMC/PA System is listed but:

Perf Status: filer-data-unavailable

Host Status: Unknown

On the System i have no syslog messages logged.

Any Ideas?

cheers Soeren

Re: DFM 4.0.1 PA -> FAS6280 8.0.2P3

adaikkap — Fri, 17 Feb 2012 13:28:46 GMT

Hi Soeren,

Is the filer running 8.0.2P3 in Cluster Mode or 7Mode ? What version of DFM are you using ?

Regards

adai

Re: DFM 4.0.1 PA -> FAS6280 8.0.2P3

daehnrich_bsh — Fri, 17 Feb 2012 13:32:19 GMT

DFM is Version 4.0.2, 4.0.1 is a typo. The System run in 7-Mode.

Re: DFM 4.0.1 PA -> FAS6280 8.0.2P3

kjag — Mon, 20 Feb 2012 15:48:02 GMT

Hi,

PA will take some time to collect the data from the controller. Once the data is available the status will be changed from Red to Green and also you can view the PA graphs.

-KJag

Re: DFM 4.0.1 PA -> FAS6280 8.0.2P3

daehnrich_bsh — Tue, 21 Feb 2012 08:59:13 GMT

Well thats wrong, when you turn on "data collection" the status change immediately to green and i got the two wrong status infos:

about host status and perf status. I got a test system with OM 5, there the host status is ok, but still Perf Status is filer-data-unavailable.

---------------------

Well, in my old environment the data collection status went always on green after i turned data collection on. in my Oncommand 5.0 environment KJag is right, it take some time.

Since the PA collect now data with oncommand 5.0 i guess it just dont work with 4.0.2. 😞

looking forward for oncommand 5.1