topic Re: Adjust alarm thresholds in Active IQ Unified Manager Discussions

Adjust alarm thresholds

stanleyj42 — Thu, 05 Jun 2025 06:09:56 GMT

Is there anyway to adjust an alarm?

I only create one lun per volume. So i purposly make the volume and the lun almost the same size. Oncommand really hates when i do this and i would like to adjust the no space limit if at all possible.

Re: Adjust alarm thresholds

adaikkap — Tue, 19 Feb 2013 02:41:52 GMT

You can modify the severity of the event using dfm eventtype modify.

Regards

adai

Re: Adjust alarm thresholds

pascalduk — Tue, 19 Feb 2013 10:56:39 GMT

And you can also modify the threshold for the alarm per volume.

dfm volume set <volume> volNearlyFullThreshold=<value>

dfm volume set <volume> volFullThreshold=<value>

Re: Adjust alarm thresholds

adaikkap — Tue, 19 Feb 2013 12:27:41 GMT

Hi Pascal,

Yes you can do that. Individual volume threshold take precedence than global volume thresholds.

Regards

adai

Re: Adjust alarm thresholds

stanleyj42 — Tue, 19 Feb 2013 14:21:04 GMT

Thanky you all for the suggestions. I think i found it.

DFM > options > defaut thresholds > change the percentage from 90% to 95%.

I believe this puts a global threshold on which is what i am after. Thanks again for all the help.