topic Re: DFM/OnCommand alert question in Active IQ Unified Manager Discussions

DFM/OnCommand alert question

CCOLEMAN_ — Thu, 05 Jun 2025 06:39:08 GMT

Anyone know what the difference between these are?

perf:system:cpu_busy_60percent:breached

perf:system:cpu_busy_60percent:normal

Is breach just when there is a single counter over 60% where as normal is a longer running average of the counters?

Re: DFM/OnCommand alert question

agireesh — Wed, 21 Dec 2011 16:32:07 GMT

"perf:system:cpu_busy_60percent:breached" means system cpu is more then 60% during specific time interval.

"perf:system:cpu_busy_60percent:normal" mean system cpu is below than 60% during specific time interval

EXP:

If you set a threshold on particular object with below values

counter: system:cpu_busy

threshold interval: 5 min

threshold value: 60

If object cpu_busy is continuously above than 60% for 5 min that mean threshold is breached and "perf:system:cpu_busy_60percent:breached" error event will be generated.

DFM keep on checking cpu_busy and if cpu_busy is continuously less than 60% for 5min then "perf:system:cpu_busy_60percent:normal" normal event will be generated

Regards,

Gireesh

Re: DFM/OnCommand alert question

CCOLEMAN_ — Wed, 21 Dec 2011 16:55:05 GMT

thanks