topic Re: Operations Manager Custom Performance thresholds for proactive alerting in Active IQ Unified Manager Discussions

Operations Manager Custom Performance thresholds for proactive alerting

fletch2007 — Thu, 05 Jun 2025 07:08:16 GMT

Hi, I recently had a performance problem with one of my aggregates - it was the second time in a few months so I decided to configure Operations Manager thresholds and alarms to alert me before the IOPS reached a critical level in the future.

I documented the analysis and procedure here

http://www.vmadmin.info/2010/09/netapp-iops-threshold-alerting.html

Feedback welcome!

Re: Operations Manager Custom Performance thresholds for proactive alerting

adaikkap — Mon, 20 Sep 2010 02:28:31 GMT

Hi fletch,

Its a nice post that PA is being used for diagnostic and nail down performance problems.The only commen I have is the thresholds can be created from NMC UI too. By two ways.

By right clicking on the tree map in the left hand side view.Add threshold.See attached pic one
Also by clicking on the Action butoon in the graph/chart, this give options like do a trending and baseline saying what will be a best value for threshold based on the history or the time range specifed.

Regards

adai

Re: Operations Manager Custom Performance thresholds for proactive alerting

fletch2007 — Mon, 20 Sep 2010 19:18:18 GMT

Thanks for the tips - I tried your method #1 with the wizard and for the last 5 minutes its been loading the available counters...

I'll try the other way too with baselines

Is there a TR doc for this?

thanks again,

Fletcher.