topic Re: Clearing SysMgr 1.1 entries in Active IQ Unified Manager Discussions

Clearing SysMgr 1.1 entries

kutner — Thu, 05 Jun 2025 07:16:15 GMT

I had a clustered system entered in my Sys Mgr and it was working fine (showing up as a cluster). We changed around somethings in our lab (IP numbers, etc) temporarily and now that things are back to normal I can't seem to get the cluster to be re-entered into SysMgr. SysMgr thinks that the two controllers are separate, not a cluster.

I've removed and reinstalled the software, and even deleted the directory under Program Files. Is any data kept anywhere else on the PC?

Any suggestions?

Thanks,

Andy

Re: Clearing SysMgr 1.1 entries

rle — Fri, 02 Apr 2010 23:23:35 GMT

Have you tried deleting the cluster and re-adding it?

- Rick -

Re: Clearing SysMgr 1.1 entries

kutner — Mon, 05 Apr 2010 16:26:08 GMT

Yes. I deleted the individual entries as well as the software and the install directory. I'm just not sure if there's a setting somewhere that is causing the SysMgr to think that the cluster is not a cluster.

Andy

Re: Clearing SysMgr 1.1 entries

rle — Tue, 06 Apr 2010 18:48:21 GMT

If you have access to snmpget, you can do this:

cfSettings:

snmpget -v 1 <filer> -c public .1.3.6.1.4.1.789.1.2.3.1.0

Values returned: notConfigured(1), enabled(2), disabled(3), takeoverByPartnerDisabled(4), thisNodeDead(5)

cfState:

snmpget -v 1 <filer> -c public .1.3.6.1.4.1.789.1.2.3.2.0

Values returned: dead(1), canTakeover(2), cannotTakeover(3), takeover(4)

cfInterconnectStatus:

snmpget -v 1 <filer> -c public .1.3.6.1.4.1.789.1.2.3.8.0

Values returned: notPresent(1), down(2), partialFailure(3), up(4)

Example:

> snmpget -v 1 beany -c public .1.3.6.1.4.1.789.1.2.3.8.0
SNMPv2-SMI::enterprises.789.1.2.3.8.0 = INTEGER: 2 => down

> snmpget -v 1 zan -c public .1.3.6.1.4.1.789.1.2.3.8.0
SNMPv2-SMI::enterprises.789.1.2.3.8.0 = INTEGER: 4 => up

- Rick -