topic onCommand Core 5.0: Enabale Perfomance advisor? in Active IQ Unified Manager Discussions

onCommand Core 5.0: Enabale Perfomance advisor?

giprosvyaz — Thu, 05 Jun 2025 06:47:10 GMT

Just installed onCommand Core 5.0

Trying to get perfomance data

Im Managment console on Manage perfomance setup i see Perf status: perf-advisor-not enabled

In Operation manager Setup>Options>Perfomance Advisor there is no option Perfomance advisor enable as i read in manual

only protocols settings

dfm host diag said:

Performance Advisor Checklist
perfAdvisorEnabled     Failed (perfAdvisorEnabled set to Disabled)
hostType               Passed
hostRevision           Passed
hostLogin              Passed
perfAdvisorTransport   Passed

dfm options list perfadvisorenabled said:
Error: There is no perfadvisorenabled option.

How i can enable it

Please help

Re: onCommand Core 5.0: Enabale Perfomance advisor?

agireesh — Mon, 29 Aug 2011 05:59:40 GMT

Hi,

It seems that performance advisor is not enabled in your setup.Please use the below command to enable the performance advisor.

[root@lnx186-77 ~]# dfm option set perfAdvisorEnabled=Enabled

Changed performance advisor enabled to Enabled.

[root@lnx186-77 ~]# dfm option list perfAdvisorEnabled

Option Value

------------------ ------------------------------

perfAdvisorEnabled Enabled

[root@lnx186-77 ~]#

And, to get the perf data of storage system you need to set thecredential of the storage system.

Please let me know for any further assignment

Regards,

Gireesh

onCommand Core 5.0: Enabale Perfomance advisor?

giprosvyaz — Mon, 29 Aug 2011 11:43:14 GMT

As i said before

dfm option set perfAdvisorEnabled=Enabled

Error: perfAdvisorEnabled is not a valid option.

dfm option list perfAdvisorEnabled

Error: There is no perfAdvisorEnabled option

Re: onCommand Core 5.0: Enabale Perfomance advisor?

agireesh — Mon, 29 Aug 2011 11:56:04 GMT

Ok, what about other options related to performance advisor. Are you able to list the other options related to performance advisor.

Can you able to list the below options.

autosupportIncludePerf Yes

perfAdvisorEnabled Enabled

perfAdvisorMaxMonitorThreads 32

perfAdvisorPollInterval 5 minutes

perfAdvisorShowAllViews Disabled

perfAdvisorShowDiagCounters Disabled

perfAdvisorTransport httpOnly

perfAdvThreshViolationMonInterval 15 minutes

perfArchiveDir /opt/NTAPdfm/perfdata

perfDataExportEnabled No

perfExportDir /opt/NTAPdfm/perfExport

perfMaxObjectInstancesInBarChart 20

perfSampleRate1 1 minute

perfSampleRate2 5 minutes

perfSampleRate3 15 minutes

perfSampleRate4 30 minutes

Regards,

Gireesh

Re: onCommand Core 5.0: Enabale Perfomance advisor?

marz — Mon, 29 Aug 2011 13:52:18 GMT

Post the first four lines of the 'dfm diag' output ton confirm that you did not install Express.

OnCommand Core 5.0 Express has no mechanism to enable Performance Advisor. Standard does contain the Performance Advisor features.

onCommand Core 5.0: Enabale Perfomance advisor?

giprosvyaz — Tue, 30 Aug 2011 05:43:00 GMT

Oh thank you!

You are right - we use a express setup

There is no words about this limitation in manual

Thank you again!

Re: onCommand Core 5.0: Enabale Perfomance advisor?

markkulacz — Fri, 30 Nov 2012 11:41:23 GMT

Just ran into this problem at a customer site. "Express" was accidentally chosen when OnCommand Core was installed.

The easiest fix is to run the installer again. It will ask if you want to update the existing database - just say "Yes".

Then, during the run of the installer, be sure to select "Standard" and not "Express".

It is OK if you are run the installer again, even if the installer is exactly the same version as the version of OnCommand that is already installed. (We verified this to be true with 5.1.X).

Re: onCommand Core 5.0: Enabale Perfomance advisor?

sener29897 — Fri, 14 Nov 2014 10:33:44 GMT

The same issue. oncommand reinstallation solved. Choose standard, not express setup!