topic Re: no SNMP Response status in OnCommand in Active IQ Unified Manager Discussions

no SNMP Response status in OnCommand

Neb — Tue, 31 Mar 2015 11:13:28 GMT

In the NetApp onCommand System I have two storage systems, both have a status of No SNMP Response. Is this normal or should I be concerned?

thanks you for any advice.

Ben

Re: no SNMP Response status in OnCommand

YIshikawa — Tue, 31 Mar 2015 13:13:32 GMT

In burt#780924, possible cause is listed as below:

System Manager displays "No SNMP Response" status on the home page
because of the following reasons:
1. SNMP is not enabled on the storage system
2. SNMP community string is incorrect
3. Access to SNMP is restricted
4. The IP address assigned is incorrect

Which version and mode of Data ONTAP are you using?

Re: no SNMP Response status in OnCommand

Neb — Tue, 31 Mar 2015 13:52:32 GMT

This is all new to me. How do I find out which version and mode of Data ONTAP I'm using?

thanks for your help

Re: no SNMP Response status in OnCommand

Hariprakash — Tue, 31 Mar 2015 14:30:12 GMT

Hi,

Perform ssh login to the storage and execute command "version" to find the ONTAP version.

Thanks

Re: no SNMP Response status in OnCommand

Spelta — Wed, 01 Apr 2015 12:45:37 GMT

Hello, I have the same "issue" so I am replying in turn.

I am running the simulator, "NetApp Release 8.2.2P1 Cluster-Mode".

Thank you very much 🙂

Re: no SNMP Response status in OnCommand

Neb — Wed, 01 Apr 2015 13:45:18 GMT

Sorry for delay. Running Release 8.2.2P2 Cluster-Mode

thanks

Re: no SNMP Response status in OnCommand

Spelta — Tue, 07 Apr 2015 12:02:00 GMT

I solved by enabling the "public" community in the cluster. Here's a picture about how it's done.

Re: no SNMP Response status in OnCommand

jkane13 — Mon, 21 Sep 2015 20:12:34 GMT

I have a couple of filers in a DMZ and the first virtual lif is in one IP domain and we have another for management in an accessable IP domain.

I am pretty sure the SNMP traps are working OK.

But, OnCommand System Manager says "No SNMP Response". THe IP Address it lists is the one on the other side of the DMZ. How can I force it to look at a different lif so I can get status updates in OnCommand System Manager?

Re: no SNMP Response status in OnCommand

Shekhar — Fri, 05 Feb 2016 05:36:17 GMT

Its working. Correct solution