Enable SNMP in WFA v2.2

rogerhinson — Thu, 05 Jun 2025 04:16:37 GMT

I'm trying to enable SNMP for WFA and when I test it I get the error "Failed sending test notification".

For Management Host, I entered our Spectrum server as the FQDN and left Management Port to 162.

Windows Firewall is not started on the server.

When I look at the WFA server.log file I see this.

2015-05-19 11:43:31,920 ERROR [org.granite.messaging.service.DefaultServiceExceptionHandler] (http-executor-threads - 85) Could not process remoting message: flex.messaging.messages.RemotingMessage {
source = null
operation = sendTestSnmp
remoteUsername = null
remotePassword = null
correlationId = null
destination = SnmpFacadeImpl
headers = {DSId=D4790FC9-0CE1-4FE6-8CF4-18823BBF7703, DSEndpoint=graniteamf}
messageId = 2433EB8A-5198-7A7D-4E0A-6D7CE0460B94
timestamp = 0
clientId = 22860225-71E1-41C1-934D-10B764BF7D1C
timeToLive = 0
body = [snmp_server_name.corplab.intuit.net, 162]
}: WfaSnmpException{Message: SNMP notification could not be sent, Cause: java.lang.IllegalArgumentException: Argument must be an unsigned 32bit value}

....

Any suggestions on resolving this?

Thanks,

Roger

Re: Enable SNMP in WFA v2.2

sinhaa — Thu, 21 May 2015 02:20:57 GMT

Roger,

Not able to reproduce this. Did you try giving the IP address of the SNMP host instead of FQDN?

WFA send SNMP v1 traps to community public. I have posted a WFA command to send SNMP trap from you WFA server. Can you try it out and see if SNMP traps are getting received successfully at the other end.

Here: http://community.netapp.com/t5/OnCommand-Storage-Management-Software-Discussions/How-to-send-snap-trap-from-workflow/m-p/99710#M17578

sinhaa

topic Enable SNMP in WFA v2.2 in Active IQ Unified Manager Discussions

Enable SNMP in WFA v2.2

Re: Enable SNMP in WFA v2.2