topic Re: Cannot invoke method tokenize() on null object in Active IQ Unified Manager Discussions

Cannot invoke method tokenize() on null object

smorganarrisi — Thu, 05 Jun 2025 05:49:11 GMT

Been using Balance to monitor for over a year and just recently started getting this error a few of our nodes. This does not happen on each node, only a few. Some work just fine. We have rebooted the balance appliance, deleted and rediscovered the filers with the same result. These filers did work at one time, but have since stopped. We are only having issues trying to collect stats. The discovery of the filers is fine. We are running 4.1.0.2.9

Re: Cannot invoke method tokenize() on null object

GMSWEET716 — Thu, 21 Nov 2013 16:02:24 GMT

What version of OnTap are you running? We just started getting this after upgrading to 8.1.3P3 and I've got a case with NetApp open for a resolution. We are running Balance 4.1.0.2 build 9 as well.

Re: Cannot invoke method tokenize() on null object

smorganarrisi — Thu, 21 Nov 2013 19:44:42 GMT

One HA pair is 8.1.3P3, but the other range from 8.1.1 to 8.1.3

Re: Cannot invoke method tokenize() on null object

GMSWEET716 — Thu, 21 Nov 2013 20:15:23 GMT

I'll post back once I hear from NetApp with a solution. Just for reference, here's how we arrived at the problem.

2 HA pairs both running 8.1.2P3 with Balance 4.1.0.1 build 26
Upgraded both HA pairs to 8.1.3P3 to solve an unrelated issue
A couple of days later I went to check on a performance item and found that stats had not collected since the OnTap Upgrade
I rebooted the Balance appliance (no change) followed by the update to Balance 4.1.0.2 build 9 (no change)
Case 2004689026 opened with NetApp

Is it just your 8.1.3P3 nodes that stopped responding? That may be the common component.

Re: Cannot invoke method tokenize() on null object

smorganarrisi — Fri, 22 Nov 2013 12:01:23 GMT

Unfortunately it was not just the P3 node. I thought that was the common component, but specifically...

8.1.3P3

8.1.3

8.1.3P1

Again we have other nodes at 8.1.3 and 8.1.3P1 and they work. None of the 8.1.3P3 work though.

Re: Cannot invoke method tokenize() on null object

GMSWEET716 — Fri, 22 Nov 2013 12:36:15 GMT

Here's what I heard from NetApp:

There is a known issue with the changes in how ONTAP 8.1.3x handles performance queries. The relevant BURT is #738776 and the remedy is to upgrade OCB to the current release 4.1.1.1. Unfortunately, I do not have enough familiarity with OCB to quantify why the one partner is still reporting performance data. I do know that the change to ONTAP made it load sensitive- if the response to OCB requires too much resources (memory) ONTAP will send a different response. OCB 4.1.0.2 is not prepared for this behavior whereas the code in 4.1.1.1 is modified to accommodate.

To obtain the latest Balance version, 4.1.1.1, please log into the Support website and navigate to the software downloads

https://support.netapp.com/NOW/download/software/oncommand_ib/4.1.1.1/download.shtml

Please review the notes on this page prior to downloading and installing OCB.

The OnCommand Balance Installation and Configuration Guide and the Release Notes are also accessible via this page.

I'm going to upgrade Balance this morning and see what happens; I'll post back my results.

Re: Cannot invoke method tokenize() on null object

smorganarrisi — Fri, 22 Nov 2013 12:53:32 GMT

I will give it a shot, was hoping to delay the upgrade because of the license changes in 4.1.1.1.

Thanks for the responses.

Re: Cannot invoke method tokenize() on null object

GMSWEET716 — Fri, 22 Nov 2013 14:02:17 GMT

I just finished the upgrade and 4.1.1.1 seems to have solved the problem for me. I'm now getting statistics on all of our filers again. I hope the licensing change doesn't affect you too badly.