different Volume Percent-Values & which Value takes Autgrow?

memoneu — Wed, 04 Jun 2025 23:20:50 GMT

Hi Guys,

so before i search to long for a solution....i open an Entry, maybe you could help me.

I noticed that exists different Used-Values by showing the Volume details (Cdot-Filer)....but from which Percentage-Value starts the AutoSize? in my case 73% or 75%

filer01::> volume show volume_esx_04 -fields percent-used,autosize-grow-threshold-percent,size
vserver     volume                 size percent-used autosize-grow-threshold-percent
----------- ---------------------- ---- ------------ -------------------------------
filer01_svm01 volume_esx_04 9TB  75%          93%


filer01::> df -h volume_esx_04
Filesystem               total       used      avail capacity  Mounted on                 Vserver
/vol/volume_esx_04/
                        8294GB     6038GB     2256GB      73%  /volume_esx_04    filer01_svm01
/vol/volume_esx_04/.snapshot
                         921GB      393GB      527GB      43%  /volume_esx_04/.snapshot
                                                                                          filer01_svm01
2 entries were displayed.

thanks

best regards

Mario

Re: different Volume Percent-Values & which Value takes Autgrow?

Anoop — Thu, 10 Sep 2015 12:22:49 GMT

Hi,

As per the example shown, the AutoSize would be triggered once the 75% would reach 93%. Hope this helps.

Thanks

topic Re: different Volume Percent-Values & which Value takes Autgrow? in Active IQ Unified Manager Discussions

different Volume Percent-Values & which Value takes Autgrow?

Re: different Volume Percent-Values & which Value takes Autgrow?