Error to import all dashboards from the grafana to harvest

Jorge_dpc — Wed, 04 Jun 2025 21:59:52 GMT

Hi all,

I installed/configured Harvest on RHEL 6.6, everything works fine except I could not export the dashboads. Here is the error:

[root@ICPLPA06 log]# /opt/netapp-harvest/netapp-manager -import

[OK ] Will import dashboards to http://10.125.10.130:443

[OK ] Imported dashboard [db_netapp-detail-harvest-poller.json] successfully

[OK ] Imported dashboard [db_netapp-detail-network-lif.json] successfully

[ERROR ] Failed to import dashboard [db_netapp-detail-7-mode-lun.json] due to error: 500 write failed: Connection reset by peer

[ERROR ] -Response was :500 write failed: Connection reset by peer --> we have a cluster with six nodes (2 FAS8040 and FAS8020)

We have not a 7mode.

In grafana we can not see the dashboard.
In graphite is collecting data from OCUM (They are capacity data) But the performance data that Harvest collects are not being updated.

I attached a pics of Grafana.

Configuration netapp-harvest.conf:

[root@ICPLPA06 netapp-harvest]# cat netapp-harvest.conf

## Configuration file for NetApp Harvest

## Create a section header and then populate with key/value parameters

## for each system to monitor. Lines can be commented out by preceding them

## with a hash symbol ('#'). Values in all capitals should be replaced with

## your values, all other values can be left as-is to use defaults

## There are two reserved section names:

## [global] - Global key/value pairs for installation

## [default] - Any key/value pairs specified here will be the default

## value for a poller should it not be listed in a poller section.

## Global reserved section

[global]

grafana_api_key = eyJrIjoiYXhDNktrQTJqMzhGd3ZmOUJkNVRnN01vMmhrczdBMjQiLCJuIjoibmV0YXBwLWhhcnZlc3QiLCJpZCI6MX0=

grafana_url = http://10.125.10.130:443

grafana_dl_tag =

## Default reserved section

[default]

#====== Graphite server setup defaults ========================================

graphite_enabled = 1

graphite_server = ICPLPA05

graphite_port = 2003

graphite_proto = tcp

normalized_xfer = mb_per_sec

normalized_time = millisec

graphite_root = default

graphite_meta_metrics_root = default

#====== Polled host setup defaults ============================================

host_type = FILER

host_port = 443

host_enabled = 1

template = default

data_update_freq = 60

ntap_autosupport = 0

latency_io_reqd = 10

auth_type = password

username = netapp-harvest

password = netapp00

ssl_cert = netapp-harvest.pem

ssl_key = netapp-harvest.key

## Monitored host examples - Use one section like the below for each monitored host

#====== 7DOT (node) or cDOT (cluster LIF) for performance info ================

[CLOALMPCDOT01]

hostname = 10.125.1.72

site = cloud

#====== OnCommand Unified Manager (OCUM) for cDOT capacity info ===============

[cloapa01]

hostname = 10.125.10.186

site = cloud

host_type = OCUM

data_update_freq = 900

normalized_xfer = gb_per_sec

I need your help!!

Best Regards,

Jorge

Re: Error to import all dashboards from the grafana to harvest

madden — Wed, 24 Feb 2016 19:31:26 GMT

Hi @Jorge_dpc

It looks like your grafana_url parameter uses http and port 443. Probably you want https.

Cheers

Chris Madden

p.s. If this solves your issue please mark this answer as correct so others can find it easily.

Re: Error to import all dashboards from the grafana to harvest

Jorge_dpc — Thu, 25 Feb 2016 09:06:11 GMT

Yes!!

I changed the .conf and URL with https and everything right!

thanks!

topic Re: Error to import all dashboards from the grafana to harvest in Active IQ Unified Manager Discussions

Error to import all dashboards from the grafana to harvest

Re: Error to import all dashboards from the grafana to harvest

Re: Error to import all dashboards from the grafana to harvest