topic Re: Connect-WFAController started failing ( WFA 3.1.0.0.P1 ) in Active IQ Unified Manager Discussions

Connect-WFAController started failing ( WFA 3.1.0.0.P1 )

trentino123 — Wed, 04 Jun 2025 18:35:23 GMT

Credentials were double checked working and valid. But the use of Connect-WFAController on 7mode equipment throws the following error 100% of the time:

Log messages:

Get-WfaCredentials -Host pirulo.com

Credentials successfully provided for 'pirulo.com' ( and double checked!! )

Connect-NaController ( with credentials ) -name pirulo.com -Timeout 60000 -ErrorAction Stop -HTTPS

ERROR Failed to connect to controller : pirulo.com

ERROR Failed executing command. Exception : failed to connected to controller : pirulo.com

Tried a POSH script importing the OnTap WFA module in the WFA server and the Connect-NaController command worked!

Therefore I believe the problem is within WFA, it started happening on Friday on all the 7mode controllers. Any thoughts ?

Thanks in advance!!

Re: Connect-WFAController started failing ( WFA 3.1.0.0.P1 )

abhit — Thu, 20 Oct 2016 04:51:00 GMT

"workflow fails to connect to a 7-Mode filer after MS KB’s were applied to the Host OS"

A similar issue was observed recently by another customer. Just wanted to know if any MS KB's were applied

and post that if you are seeing this issue.

Regards

Abhi

Re: Connect-WFAController started failing ( WFA 3.1.0.0.P1 )

veerendra — Thu, 20 Oct 2016 05:37:58 GMT

Hi ,

Can you Please check below links. It may help to reslove the Connect-WFAController issue.

http://community.netapp.com/t5/Microsoft-Cloud-and-Virtualization-Discussions/API-invoke-failed/m-p/123542

http://community.netapp.com/t5/Microsoft-Cloud-and-Virtualization-Discussions/API-invoke-failed/m-p/124099#M5097

Regards,

Veerendranadh CH.

Re: Connect-WFAController started failing ( WFA 3.1.0.0.P1 )

sinhaa — Wed, 26 Oct 2016 04:23:07 GMT

@trentino123

Have you been able to resolve this??

sinhaa