topic nfsstat -l doesn't work with other vfliers in Active IQ Unified Manager Discussions

nfsstat -l doesn't work with other vfliers

Nfsstat_Commad — Wed, 04 Jun 2025 15:19:34 GMT

Hello ,

I'm trying to command vfiler run vfiler_gaia01 nfsstat -l to determine which clients are mounted to this NFS share but it doesn't work

I've also enabled options.nfs.per_client_stats.enable . Tried to run the same command on vfile0 (vfiler run vfiler0 nfsstat -l ) and it worked

Can you please give me some advice how to run command on another vfiler than vfiler0

Kind Regards

Tien

Re: nfsstat -l doesn't work with other vfliers

ekashpureff — Wed, 15 Mar 2017 17:35:55 GMT

Tien -

Looking at the man page - it should work ?

"When run from a vfiler context, (for example, via the vfiler run command), nfsstat operates on the concerned vfiler. Note that if vfilers are licensed when using the -h and -l options it is necessary to run this command from a vfiler context, since the interpretations of the hosts are dependent on the vfiler. "

I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, FastLane US http://www.fastlaneus.com/
(P.S. I appreciate 'kudos' on any helpful posts.)

Re: nfsstat -l doesn't work with other vfliers

Nfsstat_Commad — Mon, 20 Mar 2017 07:48:53 GMT

Hi Eugene

Thank you for your reply . Yes . We've checked it.

We cannot run the command because of lack of licence .

Kind Regards

Tien