topic Re: DFM/PM 4.0 and filer names/addresses in Active IQ Unified Manager Discussions https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/DFM-PM-4-0-and-filer-names-addresses/m-p/11665#M2392 <HTML><HEAD></HEAD><BODY><P>Yes. At the filer level set the hostpreffered ip addr to the desired ones.</P><P></P><P> </P><P></P><P><A href="https://community.netapp.com/root@lnx186-236" target="_blank"></A># dfm host set</P><P></P><P>Valid options are</P><P></P><P> hostLogin Login</P><P></P><P> hostPassword Password</P><P></P><P> hostLoginProtocol Login Protocol</P><P></P><P> hostPreferredAddr1 Preferred IP address 1</P><P></P><P> hostPreferredAddr2 Preferred IP address 2</P><P></P><P> </P><P></P><P>Regards</P><P></P><P>adai</P></BODY></HTML> Wed, 16 Jun 2010 07:01:09 GMT adaikkap 2010-06-16T07:01:09Z DFM/PM 4.0 and filer names/addresses https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/DFM-PM-4-0-and-filer-names-addresses/m-p/11660#M2390 <HTML><HEAD></HEAD><BODY><P>Hi.</P><P>My customer is using the above PM to create snapmirror replication to a DR site.&nbsp; The source site and the DR site have a routable 10G vlan, with filer interfaces on it.&nbsp; The filers are 3170s and 3160s, with their 100Mb management port IPs being the ones associated with vFiler0 names in DNS.&nbsp; Is there a work-around that will allow PM to use the 10Gb interface as both source and destination for snapmirror?</P><P>Thanks.</P></BODY></HTML> Thu, 05 Jun 2025 07:13:32 GMT https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/DFM-PM-4-0-and-filer-names-addresses/m-p/11660#M2390 dcowie 2025-06-05T07:13:32Z Re: DFM/PM 4.0 and filer names/addresses https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/DFM-PM-4-0-and-filer-names-addresses/m-p/11665#M2392 <HTML><HEAD></HEAD><BODY><P>Yes. At the filer level set the hostpreffered ip addr to the desired ones.</P><P></P><P> </P><P></P><P><A href="https://community.netapp.com/root@lnx186-236" target="_blank"></A># dfm host set</P><P></P><P>Valid options are</P><P></P><P> hostLogin Login</P><P></P><P> hostPassword Password</P><P></P><P> hostLoginProtocol Login Protocol</P><P></P><P> hostPreferredAddr1 Preferred IP address 1</P><P></P><P> hostPreferredAddr2 Preferred IP address 2</P><P></P><P> </P><P></P><P>Regards</P><P></P><P>adai</P></BODY></HTML> Wed, 16 Jun 2010 07:01:09 GMT https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/DFM-PM-4-0-and-filer-names-addresses/m-p/11665#M2392 adaikkap 2010-06-16T07:01:09Z Re: DFM/PM 4.0 and filer names/addresses https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/DFM-PM-4-0-and-filer-names-addresses/m-p/11672#M2395 <HTML><HEAD></HEAD><BODY><P>This worked! Thanks, Adai.</P></BODY></HTML> Tue, 20 Jul 2010 18:23:12 GMT https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/DFM-PM-4-0-and-filer-names-addresses/m-p/11672#M2395 dcowie 2010-07-20T18:23:12Z