How to set up inode alerts in AIQ

iltifat — Wed, 04 Jun 2025 10:35:14 GMT

How do I turn on alerts for inode in AIQ. For example, an alert when inode are 90%.

Re: How to set up inode alerts in AIQ

SCOTT_LINDLEY — Mon, 15 Feb 2021 15:11:14 GMT

This is for OCUM 9.7. I don't have experience with 9.8 yet but I expect it'll be pretty much the same.

I set up 2 alerts under Storage Management/Alert Setup, configured like this:

Alert Name: Vol Inodes Nearly Full

Resources: Include "Cluster", Selected Resources "<< All Volumes >>"

Events: Selected Events "Inodes Nearly Full"

Actions: Select actions appropriate to your circumstance

And an Alert Name "Vol Inodes Full" that is identical except that under the Events page the Selected Events is "Inodes Full"

I decoded to set mine up separately in case I decided to take different actions for each circumstance, but if your action is the same then just configure one Alert and select both Selected Events.

topic How to set up inode alerts in AIQ in Active IQ Unified Manager Discussions

How to set up inode alerts in AIQ

Re: How to set up inode alerts in AIQ