topic Re: IN CDOT, what would be the Best practices for volume and Lun size in creation in Active IQ Unified Manager Discussions

IN CDOT, what would be the Best practices for volume and Lun size in creation

RSEKHAR84 — Wed, 08 May 2019 18:28:02 GMT

IN CDOT, what would be the Best practices for creating volume and Lun settings and sizes. please

Re: IN CDOT, what would be the Best practices for volume and Lun size in creation

RSEKHAR84 — Wed, 08 May 2019 18:43:52 GMT

is there any limitations to create the volume 2x size and lun x size and thin/thin

Re: IN CDOT, what would be the Best practices for volume and Lun size in creation

wareer — Fri, 20 Dec 2024 07:53:43 GMT

You can optimize your LUN and volume configurations for maximum storage utilization or for the security of write guarantees. Based on your requirements for storage utilization and your ability to monitor and replenish free space quickly, you must determine the FlexVol volume and LUN volumes appropriate for your installation.

The following link has detailed instructions：https://docs.netapp.com/us-en/ontap/volumes/determine-correct-volume-lun-config-task.html

Re: IN CDOT, what would be the Best practices for volume and Lun size in creation

Sanaman — Mon, 23 Dec 2024 00:06:21 GMT

We used to create volume size 3x of lun size (to support snaps created by snapdrive). If you have the storage then all good. To create Thin LUN make sure your application supports thin LUN, some apps require Thick LUNs.