topic Re: Aggr Scrub Status Monitoring in Active IQ Unified Manager Discussions

Aggr Scrub Status Monitoring

christop — Thu, 05 Jun 2025 06:09:56 GMT

Hi,

Is there a mechanism to report on when the last completed raid scrub was completed on an aggregate?

Within ONTAP 7-mode I can run the following:

rlawson-vsim2> aggr scrub status -v

aggr scrub: status of /aggr0/plex0/rg0 :

Scrub is not active.

Last full scrub completed: Tue Feb 22 08:43:41 PST 2011

Is there a way to report on this through Ops Mgr 4.x or UM 5.x?

Are there any alerting mechanisms that could tell me when a scrub has completed?

Re: Aggr Scrub Status Monitoring

adaikkap — Thu, 07 Mar 2013 14:09:19 GMT

Hi Christop,

Unfortunately this is not possible in the current OCUM 5.x. But its possible to write a simple script plugin to report and monitor on the same.

BTW why do you want to monitor the same ? What do you plan to do based on this event ? I am trying to understand why and what you are trying to accomplish. Given the fact that aggr scrubbing is an internal ONTAP process.

Regards

adai

Re: Aggr Scrub Status Monitoring

reide — Thu, 21 Mar 2013 21:35:00 GMT

christop,

This isn't an exact way to determine when it finished, but using Performance Advisor is a great way to visually see when a raid scrub started and finished. By examining the aggregate (under physical objects for a given controller) and looking at the "Aggregate Summary View", set the time range so that the appropriate day is shown on the chart. You can always tell when a RAID scrub is occuring by the large spike in aggregate transfers that sustain for the entire length of time the RAID scrubs runs. Its followed by a sudden plunge in aggregate transfers once the RAID scrub stops.

Unfortunately, it would be very difficult to create a performance threshold that tells you when the RAID scrub starts & finishes, as Performance Advisor has no way of knowing what is causing the aggregate transfers. It just tracks the number of transfers.