can OnCommand report capture events from OnCommand core?

scheckel — Thu, 05 Jun 2025 06:21:16 GMT

Hi,

I have a use case to count the timeframe for specific outages.

E.g. volume full genereates an event with status "error". After some time it when the problem is fixed there is another message which gets to state "normal". Is this possible to use the events to calculate the time between and provide this in a report?

Best wishes,
Markus.

Re: can OnCommand report capture events from OnCommand core?

arunchak — Thu, 09 Aug 2012 16:49:36 GMT

It is possible, but it might not be most accurate. Event is generated when the monitors run. so if the monitor has run now and after that the volume state changes to normal opsmgr generates the event only when the next monitoring cycle is run.

Thanks,

Arun

Re: can OnCommand report capture events from OnCommand core?

scheckel — Tue, 14 Aug 2012 10:52:40 GMT

Hi Arun,

thanks for your reply. I am wondering, there is no need to create db rights for events:

Enabled database

views

So my customer wants to have a report of all performance threshold violation. Which create an Event:

e.g. here the view:

output

http://vsa014622:8080/dfm/report/view/events-history/39464

vnsa1177:/vol2_H3I Report

Link to report data in spreadsheet format Add to Favorites

Events: 1-20 of 158 Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8Next Show Maximum

Sev. Event Triggered (descending) Ack'ed By Ack'ed Deleted By Deleted Source

Normal perf:VOLUME_READ_LATENCY:normal 14 Aug 03:10				Clustered Volume vnsa1177:/vol2_H3I
Error perf:VOLUME_READ_LATENCY:breached 14 Aug 03:04				Clustered Volume vnsa1177:/vol2_H3I
Normal perf:VOLUME_READ_LATENCY:normal 09 Aug 03:09				Clustered Volume vnsa1177:/vol2_H3I
Error perf:VOLUME_READ_LATENCY:breached 09 Aug 03:05				Clustered Volume vnsa1177:/vol2_H3I
Normal perf:VOLUME_READ_LATENCY:normal 05 Aug 03:03				Clustered Volume vnsa1177:/vol2_H3I
Error perf:VOLUME_READ_LATENCY:breached 05 Aug 02:51				Clustered Volume vnsa1177:/vol2_H3I
Normal perf:VOLUME_READ_LATENCY:normal 05 Aug 01:30				Clustered Volume vnsa1177:/vol2_H3I
Error perf:VOLUME_READ_LATENCY:breached 05 Aug 01:25				Clustered Volume vnsa1177:/vol2_H3I
Normal perf:VOLUME_READ_LATENCY:normal 29 Jul 02:17				Clustered Volume vnsa1177:/vol2_H3I
Error perf:VOLUME_READ_LATENCY:breached 29 Jul 02:12				Clustered Volume vnsa1177:/vol2_H3I
Normal perf:VOLUME_READ_LATENCY:normal 29 Jul 01:43				Clustered Volume vnsa1177:/vol2_H3I
Error perf:VOLUME_READ_LATENCY:breached 29 Jul 01:31				Clustered Volume vnsa1177:/vol2_H3I
Normal perf:VOLUME_READ_LATENCY:normal 24 Jul 03:09				Clustered Volume vnsa1177:/vol2_H3I
Error perf:VOLUME_READ_LATENCY:breached 24 Jul 03:03				Clustered Volume vnsa1177:/vol2_H3I
Normal perf:VOLUME_READ_LATENCY:normal 22 Jul 03:27				Clustered Volume vnsa1177:/vol2_H3I
Error perf:VOLUME_READ_LATENCY:breached 22 Jul 02:27				Clustered Volume vnsa1177:/vol2_H3I
Normal perf:VOLUME_READ_LATENCY:normal 22 Jul 02:13				Clustered Volume vnsa1177:/vol2_H3I
Error perf:VOLUME_READ_LATENCY:breached 22 Jul 02:08				Clustered Volume vnsa1177:/vol2_H3I
Normal perf:VOLUME_READ_LATENCY:normal 22 Jul 01:38				Clustered Volume vnsa1177:/vol2_H3I
Error perf:VOLUME_READ_LATENCY:breached 22 Jul 01:29				Clustered Volume vnsa1177:/vol2_H3I

Here we want to count the time how long a performance degradion was in sum. This for each volume and rate the volumes with the highest values. Then can make a decission to look closer o that volume with performance advisor to find out the problem. Hopefully Oncommand Insight Report can help here. Otherwise we have to write our own scripts. Or using tools like splunk to combine queries for a report.

Best wishes,

Markus.

topic Re: can OnCommand report capture events from OnCommand core? in Active IQ Unified Manager Discussions

can OnCommand report capture events from OnCommand core?

Re: can OnCommand report capture events from OnCommand core?

Re: can OnCommand report capture events from OnCommand core?