topic Re: FlexCache stats for OM/PA in Active IQ Unified Manager Discussions https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/FlexCache-stats-for-OM-PA/m-p/3742#M859 <HTML><HEAD></HEAD><BODY><P>There are two sets of counters related to flexcache:</P><P>1. At the volume level as you pointed out.</P><P>2. At the system level (per_ops, total, etc)</P><P></P><P>All these counters are diagnostic counters. Hence you should use with </P><P>caution.</P><P>Finally, Performance Advisor does not collect data for any of these </P><P>counters by default.</P><P></P><P>Regards</P><P>Harish</P></BODY></HTML> Wed, 16 Jun 2010 03:34:35 GMT harish 2010-06-16T03:34:35Z FlexCache stats for OM/PA https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/FlexCache-stats-for-OM-PA/m-p/3737#M857 <HTML><HEAD></HEAD><BODY><P>Hello all ... I did a search on what stats are available for flexcache enabled systems and i found this list:</P><P></P><P>Volume.FlexCacheReadOps</P><P> Volume FlexCache Read Ops/Sec</P><P> volume:flexcache_read_ops</P><P></P><P>Volume.FlexCacheWriteOps</P><P> Volume FlexCache Write Ops/Sec</P><P> volume:flexcache_write_ops</P><P></P><P>Volume.FlexCacheOtherOps</P><P> Volume FlexCache Other Ops/Sec</P><P> volume:flexcache_other_ops</P><P></P><P>These are stats to monitor the controller acting as the front-end caching system correct?</P><P></P><P>Are there any stats I could be missing?&nbsp; ( feel free to move the post if i am in the wrong area )</P></BODY></HTML> Thu, 05 Jun 2025 07:13:32 GMT https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/FlexCache-stats-for-OM-PA/m-p/3737#M857 emanuel 2025-06-05T07:13:32Z Re: FlexCache stats for OM/PA https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/FlexCache-stats-for-OM-PA/m-p/3742#M859 <HTML><HEAD></HEAD><BODY><P>There are two sets of counters related to flexcache:</P><P>1. At the volume level as you pointed out.</P><P>2. At the system level (per_ops, total, etc)</P><P></P><P>All these counters are diagnostic counters. Hence you should use with </P><P>caution.</P><P>Finally, Performance Advisor does not collect data for any of these </P><P>counters by default.</P><P></P><P>Regards</P><P>Harish</P></BODY></HTML> Wed, 16 Jun 2010 03:34:35 GMT https://community.netapp.com/t5/Active-IQ-Unified-Manager-Discussions/FlexCache-stats-for-OM-PA/m-p/3742#M859 harish 2010-06-16T03:34:35Z