topic Re: Connection Refused from Zedi (Zexplore) in Simulator Discussions

Connection Refused from Zedi (Zexplore)

mitchellcipriano — Wed, 01 Oct 2014 22:51:31 GMT

I am getting connection refused when trying to access the Netapp-7mode simulator from Zedi (Zexplore), but I am able to get access to web of the simulator using IP-address (http://IP-address/na_admin/). Below are my options httpd setting. I am new to Netapp and any help in resolving this issue will be greatly appreciated.

httpd.access legacy
httpd.admin.access legacy
httpd.admin.enable on
httpd.admin.hostsequiv.enable off
httpd.admin.max_connections 512
httpd.admin.ssl.enable off
httpd.admin.top-page.authentication on
httpd.autoindex.enable off
httpd.bypass_traverse_checking off
httpd.enable off
httpd.ipv6.enable off
httpd.log.format common
httpd.method.trace.enable off
httpd.rootdir XXX
httpd.timeout 300
httpd.timewait.enable off

Re: Connection Refused from Zedi (Zexplore)

ekashpureff — Thu, 02 Oct 2014 02:17:04 GMT

Mitchell -

What user are you trying to connect as (root) ?

I did note that you still had options httpd.admin.ssl enable turned off.

Try with it enabled.

I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant, K&H Research http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, IT Learning Solutions http://sg.itls.asia/netapp
(P.S. I appreciate 'kudos' on any helpful posts.)

Re: Connection Refused from Zedi (Zexplore)

mitchellcipriano — Thu, 02 Oct 2014 22:15:02 GMT

Yes I am trying to connect as root. However after configuring SSL and enabling it, I am able to connect to Netapp-Simulator. Thanks for your help.

Re: Connection Refused from Zedi (Zexplore)

ams73 — Fri, 01 Jul 2016 14:41:38 GMT

Hi Eugene,

what option settings are required on a 8.2 cluster to be able to connect from ZEDI?

Thanks,

-Ams

Re: Connection Refused from Zedi (Zexplore)

ekashpureff — Fri, 01 Jul 2016 15:10:03 GMT

AMS -

No options settings for Cluster mode - you should be able to connect as 'admin' on the cluster mgt lif ...

I hope this response has been helpful to you.

At your service,

Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, Fast Lane US http://www.fastlaneus.com/
(P.S. I appreciate 'kudos' on any helpful posts.)

Re: Connection Refused from Zedi (Zexplore)

ams73 — Thu, 07 Jul 2016 13:24:39 GMT

I need to connect using my own credentials, won't that work even if I'm an 'authenticated user'?