topic Re: All SSD based vsim in Simulator Discussions

All SSD based vsim

bushmr — Wed, 04 Jun 2025 15:33:58 GMT

I run most of my vsims on my macbook pro with an internal SSD. I wondered if I could run a VSIM (single node cluster) with all SSD's. So, I imported the OVA, interrupted the boot process to get into the bootloader and proceeded to modify the vsim drives using vdevinit=35:14:0,35:14:1 and when it boots it loses its mind and says that this type of machine isn't allowed to use shared disks. Anyone know the secret sauce to make this work? I tried setting the setnev var root-uses-shared-disks? to true and that doesn't work either. I know this isn't intended with the vsim but man it sure would be nice to have.

Mark

Re: All SSD based vsim

SeanHatfield — Tue, 17 Jan 2017 16:26:36 GMT

The simulated disks don't support being partitioned, so they can't be shared either ADP style or as an SSD storage pool. But you should still be able to bring up the sim with just SSD disk types. You may want to populate all 56 slots though because 500mb/disk doesn't yield very much capacity, and you'll need to add several to the root aggregate to keep it from filling up and falling over.

However it will not behave like an AFF because vsims will not currently boot in flash optimized mode, so AFF specific features wil still not be available.

Re: All SSD based vsim

bushmr — Tue, 17 Jan 2017 19:05:26 GMT

I did 4 shelves of all flash and still doesn't work. Unable to connect to Management Gateway Server. Ultimately asks if I want to login as the diag user. I'm thinking there is a vloader env that I must need to make this work.

Re: All SSD based vsim

SeanHatfield — Tue, 17 Jan 2017 20:02:11 GMT

Which version of ontap are you trying it in?

Re: All SSD based vsim

bushmr — Tue, 17 Jan 2017 20:03:20 GMT

ONTAP 9.0

Re: All SSD based vsim

SeanHatfield — Tue, 17 Jan 2017 20:43:07 GMT

I was able to bring one up, but it took a little intervention.

When I first tried to create the cluster I got

.Jan 17 12:13:24 [demossd-01:boot.varfs.backup.issue:EMERGENCY]: Backup of the /var file system failed (cp: /mroot/etc/tmpvarfs.tgz: No space left on device
varfs_backup_restore: Failed to backup /var to mroot
) 
Trying to create cluster again as previous attempt failed. .Error: The node root volume is not available. Contact support personnel for the repair procedure.

My root aggr was only 427MB

demossd-01::> aggr status
                                                                      
Warning: Only local entries can be displayed at this time. 


Aggregate     Size Available Used% State   #Vols  Nodes            RAID Status
--------- -------- --------- ----- ------- ------ ---------------- ------------
aggr0      427.5MB   21.05MB   95% online       1 demossd-01       raid_dp,
                                                                   normal

And that didn't leave much space on vol0

demossd-01::> run local df -h
Filesystem               total       used      avail capacity  Mounted on
/vol/vol0/               382MB      151MB      231MB      40%  /vol/vol0/
/vol/vol0/.snapshot       20MB      296KB       19MB       1%  /vol/vol0/.snapshot

So I added some disks

demossd-01::> run local
Type 'exit' or 'Ctrl-D' to return to the CLI
demossd-01> disk assign all
demossd-01> aggr add aggr0 3@500MB

And expanded vol0 a bit

demossd-01> vol size vol0 1560m
vol size: Flexible volume 'vol0' size set to 1560m.

Rebooted:

demossd-01> reboot
reboot not found. Type '?' for a list of commands.
demossd-01> exit
logout

demossd-01::> reboot
  (system node reboot)

Warning: Are you sure you want to reboot node "demossd-01"? {y|n}: y

And cluster setup completely successfully on the next try

ssdemo::> cluster show
Node                  Health  Eligibility
--------------------- ------- ------------
ssdemo-01             true    true

Re: All SSD based vsim

bushmr — Fri, 20 Jan 2017 01:18:52 GMT

I tried again today on a brand new vsim and I was able to get it to work. I had been doing a 4a each time (just habbit from the old days) and this seemed to have been the issue. This time I just did a 4 at the boot menu and it came up with all SSD's. It still complained about not being able to do ADP but it worked. I have 56 500GB SSD in my vsim. I will definately add more drives to root aggr and increase my vol0 like you suggested here. But it really seems that my old school habbit of typing 4a for a wipe instead of just plain 4 was the culprit.

Re: All SSD based vsim

dkorns — Fri, 07 Apr 2017 15:29:22 GMT

That is funny. I was noting the other day that I can detect old-school'ers ... they are the folks who when telling a story about what they did say: "I 4a'ed the the system" 🙂

I guess it sounds like the menu still accepts 4a as a valid input ... ??? ... but may not be a good thing to do.

Re: All SSD based vsim

Sun0S — Fri, 28 Jul 2017 12:28:15 GMT

@SeanHatfield wrote:
The simulated disks don't support being partitioned, so they can't be shared either ADP style or as an SSD storage pool. But you should still be able to bring up the sim with just SSD disk types. You may want to populate all 56 slots though because 500mb/disk doesn't yield very much capacity, and you'll need to add several to the root aggregate to keep it from filling up and falling over.

However it will not behave like an AFF because vsims will not currently boot in flash optimized mode, so AFF specific features wil still not be available.

Hi,

there was no problem to build custom all-ssd vsim, ADP is not my aim, but I'd like to play with new 9.2 aggregate level dedup feature - that needs All-Flash personality to be on. Setting bootarg.init.flash_optimized to true in the VLOADER doesn' t help. Any other hacks to bring it on?

Re: All SSD based vsim

SeanHatfield — Fri, 28 Jul 2017 15:31:59 GMT

There is another bootarg required, but it doesn't work on promoted builds.