topic Re: System ID Mismatch and reboot in Simulator Discussions

System ID Mismatch and reboot

Atish1 — Sat, 27 Sep 2025 11:19:05 GMT

Hi Team,

After clean configuration of Cluster 1 Node 2, I am getting below mentioned Warning. It will get reboot and reboot in simulator.

Ending netapp_loadnvram - 04:13:41 Boot Menu will be available. WARNING: System ID Mismatch. This usually occurs when replacing a boot device or NVRAM cards! Override system ID? {y/n}

Please assist.

Re: System ID Mismatch and reboot

andymirf — Tue, 07 Oct 2025 15:50:09 GMT

Hi.

Did you boot the node BEFORE you changed the sysid for the second node? This usually occurs when the second node has been booted to a login prompt, rebooted and then the boot parameters changed.

If this is the case, just accept )or rebuild the simulator second node and chnage the boot parameters BEFORE a boot).

Re: System ID Mismatch and reboot

Atish1 — Sat, 18 Oct 2025 07:46:04 GMT

Hi andymirf,

Thanks for the reply!

I'll rebuild the simulator second node and change the boot parameters BEFORE a boot. Once done I'll update here in reply.

Re: System ID Mismatch and reboot

GINO_ISRAEL — Mon, 10 Nov 2025 17:15:01 GMT

Did you get it running good ? What was the solution ? Thanks !

Re: System ID Mismatch and reboot

Atish1 — Tue, 11 Nov 2025 08:24:32 GMT

Hi Andymirf and GINO_ISRAEL,

I have rebuilt everything from scratch. Now everything is running fine.

Thanks for the reply!