topic VSC Installed,now trying to use MBRscan and Align in VMware Solutions Discussions

VSC Installed,now trying to use MBRscan and Align

STEVENJWILLIAMS83 — Mon, 29 Jul 2013 14:20:27 GMT

I have extracted the Host utilities to the datastore and on the ESXi host I navigate to the /opt/netapp/santools then try to run mbrscan and mbralign and it tells me they are not found....Help please.

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # ls

NOTICE.TXT config_mpath esx_info_3x san_version

brocade_info config_mpath_3x mbralign sanlun

cisco_info config_nfs mbrscan uninstall

config_hba controller_info mcdata_info

config_hba_3x esx_info qlogic_info

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # mbrscan

-sh: mbrscan: not found

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # mbralign

-sh: mbralign: not found

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # sudo mbrscan

-sh: sudo: not found

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # sudo mbralign -scan MWP_CADCAM.vmdk

-sh: sudo: not found

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools #

Re: VSC Installed,now trying to use MBRscan and Align

maness — Mon, 29 Jul 2013 14:26:03 GMT

Did you try running the command like this:

./mbrscan

Also, if that doesn't work, make sure the files have the executable bit set.

chmod +x *

Re: VSC Installed,now trying to use MBRscan and Align

STEVENJWILLIAMS83 — Mon, 29 Jul 2013 14:46:43 GMT

Nope.

/vmfs/volumes/935ccd64-e6d70c64/ISOs # cd netapp_esx_host_utilities_5_1/opt/netapp/santools

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # ./mbrscan

Panic: Cannot determine full path of './mbrscan'/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # chmod +x *

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # ./mbrscan

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # /mbrscan

-sh: /mbrscan: not found

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools # mbrscan

-sh: mbrscan: not found

/vmfs/volumes/935ccd64-e6d70c64/ISOs/netapp_esx_host_utilities_5_1/opt/netapp/santools #

Re: VSC Installed,now trying to use MBRscan and Align

HUX20002000 — Mon, 09 Dec 2013 21:33:51 GMT

Steven,

I believe 'mbrscan' needs an argument, otherwise it'll just go straight back to a prompt with no output (which indicates that it did what was requested, i.e. nothing).

Try:

./mbrscan [path to a .vmdk file]

Re: VSC Installed,now trying to use MBRscan and Align

TDUBB1234 — Thu, 02 Jul 2015 02:38:05 GMT

I am getting same error. I uploaded the folder called

and extracted the utilities on my datastore

keep getting this error

/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools # ./mbralign
Panic: Cannot determine full path of './mbralign'/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools #
/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools #
/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools #
/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools # ./mbralign --help
Panic: Cannot determine full path of './mbralign'/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools #
/vmfs/volumes/4eeb732a-6a68c2bc-67db-782bcb44e4cf/netapp_esx_host_utilities_5_2.1/opt/netapp/santools #