topic Re: mbralign tool in VMware Solutions Discussions

mbralign tool

aaw — Thu, 05 Jun 2025 07:10:22 GMT

From the instructions I can see this tool is only available to ESX Hosts not ESXi Hosts.

Any ideas if this tool will be available for ESXi Hosts?

Thanks
Carol Ostos

Re: mbralign tool

jerimiah303 — Thu, 19 Aug 2010 13:45:11 GMT

I use a linux vm to run mbralign on NFS datastores for ESXi. Basically, setup a linux vm, allow access to the datastore and run the utility.

One advantage of running on a linux vm is higher throughput as ESX limits the console.

Re: mbralign tool

forgette — Fri, 20 Aug 2010 19:43:31 GMT

Although not technically supported, Jerimiah's suggestion has been reported to work quite well on NFS datastores (for the reason he describes).

TIP: The --sparse option should be used on NFS datastores to increase speed and save space. This results in think vmdk files.

Re: mbralign tool

forgette — Fri, 20 Aug 2010 19:44:25 GMT

Sorry, this tool is not available for ESXi.

Re: mbralign tool

cplock — Wed, 25 Aug 2010 16:13:59 GMT

We use nfs, and use netapps mbralign tool from a linux non-ESX host. You could even use a VM that mounts the same storage, to align vmdk files (while vms are off), but latest mbralign doesn't work. The one we have that works is mbralign version 1.40090416. the newly released toolkit 2.0 has a new mbralign and no mbrscan. the new mbralign doesn't have a version number and works to check vmdk files (via --scan flag), but when attempting to align it throws an error about 'cannot find mbralign.pl at line 1667'. It appears broken.

Re: mbralign tool

forgette — Wed, 25 Aug 2010 16:33:30 GMT

Cross posting http://communities.netapp.com/message/37760#37760

Hello. I'm sorry to report you've stepped on a bug in 5.2. The following Knowledge Base article should help: kb59502

The work around at this point is to download the ESX Host Utilities Kit 5.1 and extract the mbralign utility from it.

Re: mbralign tool

cplock — Wed, 25 Aug 2010 16:52:39 GMT

Yes, I double checked, thats exactly the one - the version we have thats working (mbralign version 1.40090416) is the one provided in the ESX Host Utilities 5.1 - link helps since its slightly obfuscated in the download center which offers it only as Utilities for FC or iSCSi (not NFS): http://now.netapp.com/NOW/download/software/kit_iscsi/esx/5.1/download.shtml

Since the ESX Host Utilities 5.2 has a new version of mbralign that doesn't work for me, will there be a 5.3 release or a way to get the newer tool that works? Thanks!

Re: mbralign tool

bsti — Fri, 09 Dec 2011 20:31:27 GMT

This post is quite old, and from what I can see this is still an issue. I tried the mbralign tool from VSC 2.1.1 (most recent version as of this date) on a .vmdk on ESX 4.1 and it was unable to realign it. It did the scan the whole datastore thing.

I did download the 5.1 version and it worked like a charm (no corruption), but I still can perform scans using version 5.2.

I've not been able to locate a new, fixed version of mbralign. Does anyone know of one out there?

Re: mbralign tool

ashiryaev — Sat, 10 Dec 2011 10:11:20 GMT

http://www.unitek.com/training/netapp/blog/2011/12/install-mbrtools-esxi-server-2/

Re: mbralign tool

RodrigoNascimento — Sat, 10 Dec 2011 11:50:40 GMT

With VSC 2.1, a new suite of mbrtools is available, in this new version you can find mbrtools for ESX and mbrtools for ESXi.

Nascimento

NetApp - Enjoy it!