topic Re: DS14 MK1 compatibile with FAS250? in VMware Solutions Discussions https://community.netapp.com/t5/VMware-Solutions-Discussions/DS14-MK1-compatibile-with-FAS250/m-p/51864#M4925 <HTML><HEAD></HEAD><BODY><P>Agreed. Because it's not listed as supported, we must assume it is not. And I don't see getting much support for a PVR for an EOA'ed product. </P></BODY></HTML> Fri, 10 Oct 2008 20:02:29 GMT adamfox 2008-10-10T20:02:29Z DS14 MK1 compatibile with FAS250? https://community.netapp.com/t5/VMware-Solutions-Discussions/DS14-MK1-compatibile-with-FAS250/m-p/51856#M4923 <HTML><HEAD></HEAD><BODY><P><SPAN>Does anyone know if I can use DS14 MK1 disk shelves with a FAS250?</SPAN></P><P><SPAN>Thanks in advance.</SPAN></P></BODY></HTML> Thu, 05 Jun 2025 07:33:03 GMT https://community.netapp.com/t5/VMware-Solutions-Discussions/DS14-MK1-compatibile-with-FAS250/m-p/51856#M4923 seanarmstrong 2025-06-05T07:33:03Z Re: DS14 MK1 compatibile with FAS250? https://community.netapp.com/t5/VMware-Solutions-Discussions/DS14-MK1-compatibile-with-FAS250/m-p/51860#M4924 <HTML><HEAD></HEAD><BODY><P>There is no definitive guide that says mk1 isn't supported, but it isn't. The 250/270 all shipped with mk2 and I have never seen in in mk1...270 no question needs mk2 (for it's gbe interconnect ) and 250 is the same family. I have never seen a 250 in an mk1 and the hardware guide only shows an mk2 shelf with the 1GB/2GB switch set to 1GB for both 250/270. <A href="http://now.netapp.com/NOW/knowledge/docs/hardware/filer/210-00737_E0.pdf" target="_blank">http://now.netapp.com/NOW/knowledge/docs/hardware/filer/210-00737_E0.pdf</A> If you are building a FrankenFiler off support for a lab you could try the mk1 though and let us know if it works <span class="lia-unicode-emoji" title=":slightly_smiling_face:">🙂</span></P></BODY></HTML> Fri, 10 Oct 2008 19:54:54 GMT https://community.netapp.com/t5/VMware-Solutions-Discussions/DS14-MK1-compatibile-with-FAS250/m-p/51860#M4924 scottgelb 2008-10-10T19:54:54Z Re: DS14 MK1 compatibile with FAS250? https://community.netapp.com/t5/VMware-Solutions-Discussions/DS14-MK1-compatibile-with-FAS250/m-p/51864#M4925 <HTML><HEAD></HEAD><BODY><P>Agreed. Because it's not listed as supported, we must assume it is not. And I don't see getting much support for a PVR for an EOA'ed product. </P></BODY></HTML> Fri, 10 Oct 2008 20:02:29 GMT https://community.netapp.com/t5/VMware-Solutions-Discussions/DS14-MK1-compatibile-with-FAS250/m-p/51864#M4925 adamfox 2008-10-10T20:02:29Z Re: DS14 MK1 compatibile with FAS250? https://community.netapp.com/t5/VMware-Solutions-Discussions/DS14-MK1-compatibile-with-FAS250/m-p/51869#M4926 <HTML><HEAD></HEAD><BODY><P>To be honest your not far off the mark with the FrankenFiler!</P><P></P><P>This filer is only used for a VMware ESX testbed and I have been offered a MK1 full of 73GB FC drives at a good price!</P><P>Has anyone tried this before I part with my hard earned cash?</P></BODY></HTML> Fri, 10 Oct 2008 20:03:23 GMT https://community.netapp.com/t5/VMware-Solutions-Discussions/DS14-MK1-compatibile-with-FAS250/m-p/51869#M4926 seanarmstrong 2008-10-10T20:03:23Z