topic VSC 2.01 on Win2008R2 with vCenter - Plugin fun in VMware Solutions Discussions

VSC 2.01 on Win2008R2 with vCenter - Plugin fun

fishmannn — Thu, 23 Dec 2010 18:10:51 GMT

Hello,

I opened NetApp Log # 2001900768 yesterday on this. I'm working through some fun trying to get the plugin operational. Is it best practice to install it on the same server as vCenter or use a remote server? We are still setting up our Filers and have not presented netapp storage to them. However we have setup the filers with a seperate account for vCenter access, we set them to allow http access and we are not using SSL. The filers have dedicated IP addresses and I can manage them via Netapp System Manager etc.

When I open VSC in vCenter and it goes off for a long time doing discovery then assuming it is registered with vCenter it will come back with one of the filers and a NAS device by IP. I want to rid the config of the NAS device that VSC thinks is a controller. Support sent a couple kb articles that aren't much help yet.

https://kb.netapp.com/support/index?page=content&id=2011327

http://communities.netapp.com/docs/DOC-6534

I do not have a VSC.XML file on the system at this point perhaps due to all the times mucked with this thing. Right now I don't think it is properly registered with vCenter so discoveries come back empty.

https://localhost:8143/register.html comes back as

HTTP ERROR 403

Problem accessing /register.html. Reason:

    FORBIDDEN

I don't know if this is good old Windows UAC or if the plugin is just foobar to use a Netapp term.

Please give me something other than a stupid wizard to rely for configuration!

Thanks

Re: VSC 2.01 on Win2008R2 with vCenter - Plugin fun

mgrau — Mon, 27 Dec 2010 12:50:08 GMT

Hi,

try to use https://localhost:8143/Register.html

with an uppercase "R".

Cheers,

Markus

Re: VSC 2.01 on Win2008R2 with vCenter - Plugin fun

fishmannn — Mon, 27 Dec 2010 16:06:50 GMT

thanks that worked for registration.. that warrants a "you gotta be kidding me".

Re: VSC 2.01 on Win2008R2 with vCenter - Plugin fun

sam_wozniak — Wed, 18 Sep 2013 20:09:21 GMT

Thanks. This helped me with my problem. After a vCenter upgrade from 5.0 to 5.1, I was getting a HTTP Error 403, Forbidden for /Main.html while trying to use the VSC in the vSphere client. This lead me to this and I faced the same issue with a capital Registry.html. Re-registering the plugin did the trick.

Re: VSC 2.01 on Win2008R2 with vCenter - Plugin fun

BEEFY1471 — Wed, 07 May 2014 12:33:59 GMT

I cried with laughter at this solution but thank you so much. Can I get the 2 hours of my life back from netapp now please. BTW this still applies on VSC 5.0!

Re: VSC 2.01 on Win2008R2 with vCenter - Plugin fun

NICO_HOFFMANN — Fri, 20 Mar 2015 07:40:49 GMT

thank you!! Tried several browsers and destroyed a cup of coffee before ... thanks! 🙂

Re: VSC 2.01 on Win2008R2 with vCenter - Plugin fun

Alexxus — Wed, 18 Nov 2020 04:13:20 GMT

I cant believe that worked. Thank you so much.