topic Re: SVM Management LIF in VMware Solutions Discussions

SVM Management LIF

nicholsongc — Wed, 04 Jun 2025 15:23:06 GMT

Keep in mind this is Ontap 8.2.2P1..

I saw a mgmt LIF on a SVM that was DOWN, ports were oper/admin DOWN

We are FCoE-only on that cluster and I figured the old guy created it years ago for NAS and they never implemented it... so I deleted ithe LIF..

VSC backups started failing for VMs using datastores provisioned from storage on that SVM

Didn't put the 2 together until I opened a case with NetApp support.

I re-created the LIF (same IP, ports, home, etc.)... and verified it was definitely DOWN/DOWN... cant ping in or out... but the backups are running fine again.

Does anyone have a punchline for THAT riddle?

Re: SVM Management LIF

scottgelb — Fri, 03 Mar 2017 16:31:49 GMT

It could be no route to host.. 8.2 and prior use a routing table per lif with route show and route rule show... make sure the lif has the route added to it.. 8.3 and higher route per SVM not per lif.

Re: SVM Management LIF

scottgelb — Fri, 03 Mar 2017 16:32:25 GMT

"network interface modify" and modify the route rule needed

Re: SVM Management LIF

nicholsongc — Fri, 03 Mar 2017 16:50:13 GMT

Thank you, Scott.. I'm the first to admit my networking knowledge could alway be greater. So if I'm missing the mark here PLEASE don't hesitate to point out even the obvious with me.

I'm just curious at to WHY a LIF that is DOWN would be necessary for VSC to complete a backup operation involving data on the owning SVM.

To me its like being able to walk freely in/out of a locked door yet when the door is removed from its hinges you can no longer access the room.