AFF, NVMe, EF-Series, and SolidFire Discussions

AFF200 Dual controller 8 disks

Hi

 

I am currently configuring a AFF200 system with 8 disk. 

The system is configured with root-data partioning. I assigned all the data partiotions to 1 node:

 

 

AFF1-Cluster::*> aggr show-spare-disks

Original Owner: AFF1-Cluster-01
Pool0
Root-Data1-Data2 Partitioned Spares
Local Local
Data Root Physical
Disk Type Class RPM Checksum Usable Usable Size Status
---------------- ------ ----------- ------ -------------- -------- -------- -------- --------
1.0.0 SSD solid-state - block 678.5GB 0B 894.3GB zeroed
1.0.1 SSD solid-state - block 678.5GB 0B 894.3GB zeroed
1.0.2 SSD solid-state - block 678.5GB 0B 894.3GB zeroed
1.0.3 SSD solid-state - block 678.5GB 0B 894.3GB zeroed
1.0.4 SSD solid-state - block 678.5GB 0B 894.3GB zeroed
1.0.5 SSD solid-state - block 678.5GB 0B 894.3GB zeroed
1.0.6 SSD solid-state - block 678.5GB 0B 894.3GB zeroed
1.0.7 SSD solid-state - block 678.5GB 0B 894.3GB zeroed

 

Now i want to create a single aggr, but i cant because the system cannot fine any spares:

 

The selected disk type that is assigned to node "AFF1-Cluster-01" has low spare disks. Add disks to the node or select another disk type.

 

I am stuck now. Can somebody try to point me in the right direction?

 

Thanks in advance.


Reinhart

2 REPLIES

Re: AFF200 Dual controller 8 disks

This topic can be closed. It was a issue with the gui. 

 

Thanks


Reinhart

Re: AFF200 Dual controller 8 disks

А200 support root-data-data partitions, this is bettter in ters of perfomance and usage of disk space.
Forums