AFF, NVMe, EF-Series, and SolidFire Discussions

Disk failed

hi,

I m new with NetApp

today i've got following message when i checked with sysconfig command

Vfiler-*****> sysconfig -r
Aggregate aggr0 (online, raid_dp, degraded) (block checksums)
Plex /aggr0/plex0 (online, normal, active, pool0)
RAID group /aggr0/plex0/rg0 (degraded)

RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
dparity 0c.00.0 0c 0 0 SA:B 0 SATA 7200 847555/1735794176 847884/1736466816
parity FAILED N/A 847555/1735794176
data 0c.00.2 0c 0 2 SA:B 0 SATA 7200 847555/1735794176 847884/1736466816
data 0c.00.11 0c 0 11 SA:B 0 SATA 7200 847555/1735794176 847884/1736466816
data 0c.00.3 0c 0 3 SA:B 0 SATA 7200 847555/1735794176 847884/1736466816
data 0c.00.4 0c 0 4 SA:B 0 SATA 7200 847555/1735794176 847884/1736466816
data 0c.00.7 0c 0 7 SA:B 0 SATA 7200 847555/1735794176 847884/1736466816
data 0c.00.5 0c 0 5 SA:B 0 SATA 7200 847555/1735794176 847884/1736466816
data 0c.00.8 0c 0 8 SA:B 0 SATA 7200 847555/1735794176 847884/1736466816
data 0c.00.9 0c 0 9 SA:B 0 SATA 7200 847555/1735794176 847884/1736466816
data 0c.00.6 0c 0 6 SA:B 0 SATA 7200 847555/1735794176 847884/1736466816


Pool1 spare disks (empty)

Pool0 spare disks (empty)

 

my parity disk is failed ! what's the reason of this message ?

what can i do ? change the hard drive ?

thanks

1 REPLY 1

Re: Disk failed

you'll need to open a support case with NetApp or the partner the system is supported with. the new drives have to be compatible. by the fact you don't have spare drives listed in the spare pool. i assume you might have more than one disk that failed.

 

Gidi

Gidi Marcus (Linkedin) - Storage and Microsoft technologies consultant - Hydro IT LTD - UK
Forums