All of them are logged in to the Switch.. sh flogi database details shows everything logged in and operational. Like I said these are not zoned with any of the host but for the TEST Host with which I have zoned. Makes Sense ?
Below is the output of the Zoning, Note in the second fabric I have only zoned with AFF on both the switch because the 16GB Ports from the FAS is not cabled up to the switch. The intention was for the data movement between nodes. But still the TEST Server is zoned with AFF.
Test Server WWPN and they are logged in and currently accessing a 3 party Storage.
50:01:41:81:01:6a:9e:73
50:01:44:81:06:6b:9e:74
NASP::> igroup show -vserver vs-block-01 -igroup TEST
Vserver Name: vs-block-01
Igroup Name: TEST
Protocol: fcp
OS Type: hpux
Portset Binding Igroup: IGROUP
Igroup UUID: 4ea5af32-2a30-11e9-ae09-00a098d03e1a
ALUA: true
Initiators: 50:01:41:81:01:6a:9e:73 (not logged in)
50:01:44:81:06:6B:9e:74 (not logged in)
First Fabric
MDS1# show zone active vsan 10
zone name TEST_FAS8200_N1N2 vsan 10
* fcid 0x900401 [pwwn 50:01:41:81:01:6a:9e:73]
* fcid 0x010b01 [pwwn 20:08:00:a0:98:d0:4f:2e] [Netapp]
* fcid 0x010c01 [pwwn 20:09:00:a0:98:d0:4f:2e] [Netapp]
zone name TEST_AFF200_N3N4 vsan 10
* fcid 0x900401 [pwwn 50:01:41:81:01:6a:9e:73]
* fcid 0x010a01 [pwwn 20:13:00:a0:98:d0:3f:1e] [Netapp]
* fcid 0x010901 [pwwn 20:14:00:a0:98:d0:3f:1e] [Netapp]
Second Fabric
MDS2# show zone active vsan 11
zone name TEST_AFF200_N3N4 vsan 11
* fcid 0x3a0401 [pwwn 50:01:44:81:06:6b:9e:74]
* fcid 0x020901 [pwwn 20:26:00:a0:98:d0:3f:1e] [Netapp]
* fcid 0x020801 [pwwn 20:28:00:a0:98:d0:3f:1e] [Netapp]