Active IQ Unified Manager Discussions

Looking for API cache acquisition script example (controller creds)

abrian
2,844 Views

I'm trying to use a POSH script to acquire some data directly from controllers that isn't already in the storage schema.   I see how to iterate over a list of controllers for a specific DFM server from looking at the performance schema script, but I'm not clear on how to get credentials for the controllers.

The controller credentials are configured in WFA (existing workflows operate on them successfully), but when I use Get-NaCredential $ip (where $ip is a controller IP address returned from host-info-list-iter-* on the DFM server), I get an empty result.  I'm printing out the IPs, so I know they are correct.   Is there a different way to get credentials from within a schema script?

Thanks!

Brian

2 REPLIES 2

abrian
2,844 Views

Here's some more information.   When I posted above, I was trying to use API direct to the controller using New-WFAZapiServer.  I've switch to using the ONTAP toolkit to see if I can get further.  Unfortunately, running Connect-WFAController in a loop only works for the first iteration, all others fail with invalid credentials.   I have confirmed both by running workflows and by using the Test Connection feature of Credentials that the credentials are correct (in fact, they are exactly the same for all 4 controllers in question).  Here's some logging showing the behavior (10.61.169.30-33 are controllers that have valid credentials, but only the first works):

2013-04-03 17:23:24,067 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-14) Volume Root:Starting Volume Root Acquisition

2013-04-03 17:23:28,442 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-28) Volume Root:Scanning filer at 10.61.169.30

2013-04-03 17:23:28,442 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-38) Volume Root:Get-NaCredentials -Host 10.61.169.30

2013-04-03 17:23:28,473 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-4) Volume Root:Connect-NaController (with credentials) -Name 10.61.169.30

2013-04-03 17:23:29,192 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-22) Volume Root:Connected to controller

2013-04-03 17:23:31,035 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-24) Volume Root:Scanning filer at 10.61.169.31

2013-04-03 17:23:31,035 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-20) Volume Root:Get-NaCredentials -Host 10.61.169.31

2013-04-03 17:23:31,082 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-8) Volume Root:Connect-NaController (with credentials) -Name 10.61.169.31

2013-04-03 17:23:31,098 EDT WARN  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-52) Volume Root:Failed to connect to controller: 10.61.169.31, Incorrect credentials for 10.61.169.31.

2013-04-03 17:23:31,113 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-64) Volume Root:Scanning filer at 10.61.169.32

2013-04-03 17:23:31,113 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-63) Volume Root:Get-NaCredentials -Host 10.61.169.32

2013-04-03 17:23:31,145 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-23) Volume Root:Connect-NaController (with credentials) -Name 10.61.169.32

2013-04-03 17:23:31,192 EDT WARN  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-16) Volume Root:Failed to connect to controller: 10.61.169.32, Incorrect credentials for 10.61.169.32.

2013-04-03 17:23:31,192 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-6) Volume Root:Scanning filer at 10.61.169.33

2013-04-03 17:23:31,207 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-25) Volume Root:Get-NaCredentials -Host 10.61.169.33

2013-04-03 17:23:31,238 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-2) Volume Root:Connect-NaController (with credentials) -Name 10.61.169.33

2013-04-03 17:23:31,254 EDT WARN  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-17) Volume Root:Failed to connect to controller: 10.61.169.33, Incorrect credentials for 10.61.169.33.

2013-04-03 17:23:31,395 EDT INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (http-0.0.0.0-80-9) Volume Root:Volume Root Acquisition Complete

Here's the relevant code:

Get-WFALogger -Info -message "Starting Volume Root Acquisition"

$connectionInfo = get-ConnectionInfo

$dfm = New-WFAZapiServer -Host $connectionInfo["host"] -Port $connectionInfo["port"] -Credentials $connectionInfo["credentials"] -Type "DFM"

$filerIPs = Get-DfmFilers($dfm)

foreach ($ip in $filerIPs) {

    Get-WFALogger -message "Scanning filer at $ip" -Info

    Try {

        $filer = Connect-WFAController -Array $ip

    }

    Catch [system.exception] {

        $err = $_.Exception.Message -replace ".`n", ", "

        Get-WFALogger -Warn -message "$err"

        continue

    }

    if (!$filer) {

        Get-WFALogger -Warn -message "Cannot connect to filer at $ip, empty credentials"

        continue

    }

    $rootVol = Get-NaVolRoot -controller $filer

    $domain = (Get-NaOption -controller $filer dns.domainname).value

    $name = Get-NaSystemInfo -controller $filer

    Add-Content $volRootFile ([byte[]][char[]] "\N`t$rootVol`t$name`t$name.$domain`t$ip`n") -Encoding Byte

}

Get-WFALogger -Info -message "Volume Root Acquisition Complete"

I'm not sure what I could be doing wrong here.  It sure looks like Connect-WFAController may be hanging on to some state.  If I try to use Get-NaCredentials explicitly, I'm back to the problem I had with the New-WFAZapiServer approach (null creds from Get-NaCredentials).

Attached is the Data Source Type.  Any ideas?

Thanks!

Brian

karale
2,844 Views

Can you try "Get-WfaCredentials -Host <IP>" and see if you are getting Credentials saved with WFA?

Public