Converged Infrastructure Discussions

Highlighted

How can I shutdown NetAppHCI

Hi,

 

We want to know how to shutdown NetAppHCI(compute node and storage node both.)

 

Could you tell me how to shutdown these system?

 

We want to know IPMI ip address.

We can not memorise IPMI ip address.

so we think need cold start then check IPMI IP address by TUI(key board and monitor).

 

Best Regards,

5 REPLIES

Re: How can I shutdown NetAppHCI

Re: How can I shutdown NetAppHCI

Hi SpindleNinja,

 

Thank you for your reply.

 

I could not find a how to shutdown.
So your response was very helpful.

 

Best Regards,

Re: How can I shutdown NetAppHCI

HI SHINSASA,

 

you can shutdown all Storage Nodes by entering the following command in your browser:

 

https://<mvip>/json-rpc/1.0?method=Shutdown&nodes=[1,2,3,4]&option=halt

 

<mvip> = Your Cluster Management IP

[1,2,3,4] = The Nodes you want to shut down. If you have 5 or 6 Node you have to list them.

 

For Example if you want to shutdown all 6 Nodes:

https://192.168.1.150/json-rpc/1.0?method=Shutdown&nodes=[1,2,3,4,5,6]&option=halt

 

Kind regards

 

Andre

Re: How can I shutdown NetAppHCI

Hi,ANDRESCHMITZ

 

Thank you for your reply.

This is great.

 

I want to test this command.

 

Best Regards,

Re: How can I shutdown NetAppHCI

Have fun and leave a Like for me in this thread Smiley Wink

 

By the way... to Shut down the Compute Nodes, do what you have done in history with normal ESX Hosts. Shut down vms, shut down ESX Hosts.

 

Kind regards

 

Andre

Forums