I am waiting for support to help me with this issue, but I thought I would try the community forum while I wait. I have the following problem:
I did an:
aggr copy aggr1 backup
Once this finished, I brought the aggr online to verify the data
Then I did:
snap restore -A nightly.0 backup
This resulted in the following:
WARNING! This will revert the aggregate to a previous snapshot.
All modifications to the aggregate after the snapshot will be
Aggregate backup will be made restricted briefly before coming back online.
Are you sure you want to do this? y
It took a few minutes for this command to return. I now have an aggr that is in an offline state with the following error:
aggr status -v backup
Aggr State Status Options
backup unmounting raid_dp, aggr nosnap=off, raidtype=raid_dp,
Plex /backup/plex0: online, normal, active
RAID group /backup/plex0/rg0: normal
RAID group /backup/plex0/rg1: normal
It's been stuck in this state for the last 20 hours.
Hoping someone has some suggestions or ideas.