Data Backup and Recovery

run POST_CLONE_CREATE on SC_CLONE_TARGET

mauro
2,888 Views

I have Snapcreator 4.0p1 server on windows and snapcreator 4.0p1 agent on Linux with Oracle.

I would like to use "clone vol" action , map luns on a third linux machine (test machine), then run a script on the test machine for  import vx dg and mount filesystem.

Here the main variables used in config file:

SC_AGENT=oraprod6N:9090  (the PROD oracle machine)

NTAP_CLONE_IGROUP_MAP=fas6280a:as_lnx180_as_lnx181_oraprod6_dg_bin/ig_as_lnx150_as_lnx151;fas6280a:as_lnx180_as_lnx181_oraprod6_dg_ctl/ig_as_lnx150_as_lnx151;fas6280a:as_lnx180_as_lnx181_oraprod6_dg_data1/ig_as_lnx150_as_lnx151;fas6280a:as_lnx180_as_lnx181_oraprod6_dg_data2/ig_as_lnx150_as_lnx151;fas6280a:as_lnx180_as_lnx181_oraprod6_dg_temp/ig_as_lnx150_as_lnx151;fas6280a:as_lnx180_as_lnx181_oraprod6_dg_redo/ig_as_lnx150_as_lnx151;fas6280a:as_lnx180_as_lnx181_oraprod6_dg_sibapp/ig_as_lnx150_as_lnx151

(lun mapped on the TEST machine)

SC_CLONE_TARGET=10.47.77.110:9090 (the TEST machine)

POST_CLONE_CREATE_CMD01=/opt/netapp/script_sc/post_mount_test.sh  (script for mount fs from cloned luns on the TEST machine)

I expect that the script will run on the test machine, but it seems executed on the agent oraprod6N (PROD machine)

[2013-10-08 16:01:11,400] INFO: [oraprod6N:9090 (4.0.0.1)] Executing Post clone create command [/opt/netapp/script_sc/post_mount_test.sh] on oraprod6N

[2013-10-08 16:01:11,400] DEBUG: [oraprod6N:9090 (4.0.0.1)] Executing command [/opt/netapp/script_sc/post_mount_test.sh]

[2013-10-08 16:01:11,400] TRACE: Command [/opt/netapp/script_sc/post_mount_test.sh] finished with

exit code: [-1]

Why?

From installation guide

SC_CLONE_ TARGET:

Snap Creator has the capability to perform clone operations.

Using the action cloneVol in combination with {PRE|POST}_CLONE_CREATE_CMDxx, you can handle the storage objects on the remote side. For example, mounting/

unmounting file systems. To specify a clone target, enter its name or IP address followed by a colon and the port the Snap Creator Agent is listening on.

many thanks,

Mauro.

1 ACCEPTED SOLUTION

ktenzer
2,888 Views

Try this to specify the clone target

POST_CLONE_CREATE_CMD01=CLONETARGET: /opt/netapp/script_sc/post_mount_test.sh

You can user SERVER:, AGENT:, or CLONETARGET: with all commands

Regards,

Keith

View solution in original post

2 REPLIES 2

ktenzer
2,889 Views

Try this to specify the clone target

POST_CLONE_CREATE_CMD01=CLONETARGET: /opt/netapp/script_sc/post_mount_test.sh

You can user SERVER:, AGENT:, or CLONETARGET: with all commands

Regards,

Keith

mauro
2,888 Views

it works!!

many thanks.

ciao.

Public