Data Backup and Recovery
Netapp 2020 filers installed with Fibre Channel Host Adapter 0a (Q-Logic 2432 rev. 2),we have two FC’s installed on it but we are using only one right now.
Planning to replace the unused FC HBA card to our new FAS 2240 filer, but question is is that above fc adapter can be used for new filer?
Can you confirm is it ok to swap the same FC to our new filer FAS 2240/4U?
Net020-filer> storage show adapter
Description: Fibre Channel Host Adapter 0a (QLogic 2432 rev. 2)
Firmware Rev: 4.4.0
FC Node Name: 5:00a:098001:
FC Packet Size: 2048
Link Data Rate: 4 Gbit
SRAM Parity: Yes
External GBIC: No
In Use: Yes
Description: Fibre Channel Host Adapter 0b (QLogic 2432 rev. 2)
FC Node Name: 5:00a:098101:
Link Data Rate: 1 Gbit
In Use: No
Join our Discord Community