Data Backup and Recovery

MPIO - how do I change paths to luns

dwutke
2,739 Views

Hi,

We are connecting from a windows 2008 server a netapp lun via two MPIO paths: 192.168.10.1 and 192.168.10.1 (this is our production network)

We want to change the connection to different paths on a private iscsi network now: 192.168.201.1 and 192.168.202.1

Do we need to disconnect the drives and re-connect use snapdrive?

Is there any good documentation on how to setup snapdrives using MPIO?

This is on a MS active /passive clustered SQL 2008 server with snapmanager for sql installed.

Thanks,
Dean

1 ACCEPTED SOLUTION

rodrigon
2,739 Views

Hi,

You should add the private network (192.168.201.1 and 192.168.202.1) to the iSCSI Initiator Software. At Microsoft MPIO, check if you have 4 paths to the disks. If everything is Ok, you are able to remove the path through 192.168.10.1 and 192.168.11.1.

Regards,

Rodrigo Nascimento

View solution in original post

2 REPLIES 2

rodrigon
2,740 Views

Hi,

You should add the private network (192.168.201.1 and 192.168.202.1) to the iSCSI Initiator Software. At Microsoft MPIO, check if you have 4 paths to the disks. If everything is Ok, you are able to remove the path through 192.168.10.1 and 192.168.11.1.

Regards,

Rodrigo Nascimento

dwutke
2,739 Views

Thanks Rodrigo , this worked and was straightforward.

Public