Hi,
I doubt SnapCenter for VMware can - Power-off and Power-on VMs, it will only take snapshots based on the point-in-time state of the VMs i.e On, off or suspended.
However, it does have a provision for pre/post scripts but it has pre-defined Environmental variables.
Support for prescripts and postscripts:
http://docs.netapp.com/ocsc-40/index.jsp?topic=%2Fcom.netapp.doc.ocsc-dpg-vm%2FGUID-6DF35CD2-7396-40FC-8E45-C464FA1A36F3.html
Scripts are executed according to the value set for BACKUP_PHASE.
BACKUP_PHASE=PRE_BACKUP
Environment variables passed to scripts:
VIRTUAL_MACHINE.# <power-state>|<VM snapshot>|
power-state = has the values POWERED_ON, POWERED_OFF, or SUSPENDED
VM snapshot = has the values true or false
I haven't tested/tried, but I am guessing: If you set the value for - power-state to 'off' and 'VM snapshot 'true'. Then, it will take snapshot only when the state is powered-off.
But, if your intention is to - Trigger Power-off VMs (specific) before snap and Power-on post Snapcenter backups. You may be able to customise and schedule it.
In Theory:
1) Create a separate resource group (name it say -linux-specific) and add the specific Vms (linux ones) to it, set it to run, let's say @21 Hrs everyday.
2) Create a custom pre-script : That checks the state of the VMs in that resource group and if the VMs are power-on, it will be powered-off. Run this script @20:45hrs, so that it will power-off the VMs before the snapcenter job kicks-off.
3) Create a custom post-script : That will power-on the VMs in that resource group. Run this script @21:15. Usually, SnapCenter backup takes less than a minute, so 15 mints are more than enough, you might be able to set it to 21:10hrs.
Thanks!
