Data Backup and Recovery

Snapdrive report error when backup with SMO

katalinali
6,772 Views

Hi guys,

 

I get errors as:

(1)

--[ERROR] SMO-13032: Cannot perform operation: Backup Create. Root cause: SMO-11007: Error cloning from Snapshot copy: FLOW-11019: Failure in ExecuteConnectionSteps: SD-00027: Error connecting filesystem(s) [/opt/oracle/oradata/netorca/db] from snapshot smo_netorca01_netorca_f_h_1_ff8080814c5fa8f2014c5fa8f7f00001_0: SD-10016: Error executing snapdrive command "/usr/sbin/snapdrive snap connect -fs /opt/oracle/oradata/netorca/db /opt/NetApp/smo/mnt/-opt-oracle-oradata-netorca-db-20150328171512303_0 -snapname kat_svm:/vol/vol_netorca_db:smo_netorca01_netorca_f_h_1_ff8080814c5fa8f2014c5fa8f7f00001_0 -autorename -noreserve -prefixfv SnapManager_20150328171512324":
connecting netorcadbvg:
LUN copy lun_netorca_db_0 ... create failed
0003-358 Admin error: Failed to clone LUN lun_netorca_db_0 on storage system kat_svm : Clone operation failed to start: Requested space exceeds that reserved by the token.

 

 

=================================

The lun size is 5G with free space over 3G and the volume size is 25G with snapshot reserve 0 and I have prepared up 100 lun ID on host side:

dg: netorcadbvg dgtype lvm
hostvol: /dev/mapper/netorcadbvg-lvol state: AVAIL
fs: /dev/mapper/netorcadbvg-lvol mount point: /opt/oracle/oradata/netorca/db (persistent) fstype ext3

device filename adapter path size proto state clone lun path backing snapshot
---------------- ------- ---- ---- ----- ----- ----- -------- ----------------
/dev/mapper/3600a0980506570566a2b46715035694f - P 4.8g fcp online No kat_svm:/vol/vol_netorca_db/lun_netorca_db -

 =================================

(2)

I choose to use RMAN with control file but I still get following warning and I have check with RMAN. There is not backup list in RMAN right now

--[ WARN] ORACLE-00105: Failed to uncatalog /opt/oracle/oradata/netorca/ctl/SMOBakCtl_1427536338545_1 from RMAN.  Most likely the file has already been uncatalogued manually or by another process, but it may need to be manually removed.

 

I have no idea how do the errors happen. Can someone give me some advices

 

Thanks all.

1 ACCEPTED SOLUTION

falits
6,661 Views

i had the same problem after migrating from 7 Mode to 8.3. Try to change the san-clone-methode in snapdrive.conf from lunclone to unrestricted

 

san-clone-method="unrestricted" 

 

this worked for me

View solution in original post

4 REPLIES 4

deepuj
6,696 Views

Hi,

 

Hope flexclone is licensed?

 

Thanks

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

katalinali
6,679 Views

Yes, I can create snapshot and flex clone on the storage successfully

falits
6,662 Views

i had the same problem after migrating from 7 Mode to 8.3. Try to change the san-clone-methode in snapdrive.conf from lunclone to unrestricted

 

san-clone-method="unrestricted" 

 

this worked for me

katalinali
6,617 Views

Hi 

 

It works! Thanks very much.

Public