I have Snapcreator 4.0p1 server on windows and snapcreator 4.0p1 agent on Linux with Oracle.
I would like to use "clone vol" action , map luns on a third linux machine (test machine), then run a script on the test machine for import vx dg and mount filesystem.
Here the main variables used in config file:
SC_AGENT=oraprod6N:9090 (the PROD oracle machine)
NTAP_CLONE_IGROUP_MAP=fas6280a:as_lnx180_as_lnx181_oraprod6_dg_bin/ig_as_lnx150_as_lnx151;fas6280a:as_lnx180_as_lnx181_oraprod6_dg_ctl/ig_as_lnx150_as_lnx151;fas6280a:as_lnx180_as_lnx181_oraprod6_dg_data1/ig_as_lnx150_as_lnx151;fas6280a:as_lnx180_as_lnx181_oraprod6_dg_data2/ig_as_lnx150_as_lnx151;fas6280a:as_lnx180_as_lnx181_oraprod6_dg_temp/ig_as_lnx150_as_lnx151;fas6280a:as_lnx180_as_lnx181_oraprod6_dg_redo/ig_as_lnx150_as_lnx151;fas6280a:as_lnx180_as_lnx181_oraprod6_dg_sibapp/ig_as_lnx150_as_lnx151
(lun mapped on the TEST machine)
SC_CLONE_TARGET=10.47.77.110:9090 (the TEST machine)
POST_CLONE_CREATE_CMD01=/opt/netapp/script_sc/post_mount_test.sh (script for mount fs from cloned luns on the TEST machine)
I expect that the script will run on the test machine, but it seems executed on the agent oraprod6N (PROD machine)
[2013-10-08 16:01:11,400] INFO: [oraprod6N:9090 (4.0.0.1)] Executing Post clone create command [/opt/netapp/script_sc/post_mount_test.sh] on oraprod6N
[2013-10-08 16:01:11,400] DEBUG: [oraprod6N:9090 (4.0.0.1)] Executing command [/opt/netapp/script_sc/post_mount_test.sh]
[2013-10-08 16:01:11,400] TRACE: Command [/opt/netapp/script_sc/post_mount_test.sh] finished with
exit code: [-1]
Why?
From installation guide
SC_CLONE_ TARGET:
Snap Creator has the capability to perform clone operations.
Using the action cloneVol in combination with {PRE|POST}_CLONE_CREATE_CMDxx, you can handle the storage objects on the remote side. For example, mounting/
unmounting file systems. To specify a clone target, enter its name or IP address followed by a colon and the port the Snap Creator Agent is listening on.
many thanks,
Mauro.
