scf-00074

[Vlad]

i'm getting erros on clean up with suggestion to increase the WRAPPER_TIMEOUT_IN_MSEC value in agent.properties and couldn't find much information on what' the supported range?
the current value is 3600000..

Thanks

-Vlad

[amarnatr]

WRAPPER_TIMEOUT_IN_MSEC is used when SCF Agent is communicating with the plugin.

This value is internally represented as a int. So its max value is 2^31-1. (2 power 31)

[lcoppitelli]

Got the same problem

WRAPPER_TIMEOUT_IN_MSEC is set to 288000000 msec (80 Hours)

#cat agent.properties | grep -i wrap
WRAPPER_TIMEOUT_IN_MSEC=288000000

But the process timeouts after just 5 minutes.

########## Application cleanup ##########
[2015-07-06 00:05:35,764] INFO: Performing cleanup on : oracle
[2015-07-06 00:05:40,897] ERROR: [xxx:9090 (4.1.1.1)] Operation failed. Verify that plugins/wrapper/wrapper binary has execute permission set. Increase the WRAPPER_TIMEOUT_IN_MSEC value in agent.properties if operations require more time to complete.
[2015-07-06 00:05:40,897] ERROR: [xxx:9090(4.1.1.1)] SCF-00074: Cleanup for plug-in [oracle] failed with error [null] and exit code [102], Exiting!
########## Agent Workflow Finalization ##########

no entry for SCF-00074 on the admin guide either

[marcel_juhnke]

Hi, in this case it nothing to do with the configured wrapper timeout in the Agent config.

I found that the same error message is thrown if the SC_AGENT_TIMEOUT is reached, which by default is set to 300 seconds (your 5 minutes). So you want to set this value higher first.

But usually Quiescing & Unquiescing an Oracle DB should not take any longer than that.

Regards

Marcel

[lcoppitelli]

@marcel_juhnke

Thank you for your input, unfortunately, SC_AGENT_TIMEOUT on the server side was already set to 3600s (1h) as well...

[marcel_juhnke]

Sorry, you're right. I meant SC_AGENT_UNQUIESCE_TIMEOUT actually, which is 305 by default.

[lcoppitelli]

Even that, its already set to 3605 😞

########################################################################################################################
#     Agent Options                                                                                                    #
########################################################################################################################
SC_AGENT_UNQUIESCE_TIMEOUT=3605
SC_AGENT_WATCHDOG_ENABLE=N
SC_AGENT=
SC_AGENT_LOG_ENABLE=Y
SC_AGENT_TIMEOUT=3600

[subhayan]

Hello Everyone, I understand this is one of the older posts. We have seen the same behaviour in one of our boxes. Did anyone of you actually manage to fix it?

[2016-08-28 23:56:22,409] INFO: Performing cleanup on : oracle
[2016-08-28 23:56:27,543] ERROR: [ngzadwdb02-stg:9090 (4.1.1.1)] Operation failed. Verify that plugins/wrapper/wrapper binary has execute permission set. Increase the WRAPPER_TIMEOUT_IN_MSEC value in agent.properties if operations require more time to complete.
[2016-08-28 23:56:27,544] ERROR: [ngzadwdb02-stg:9090(4.1.1.1)] SCF-00074: Cleanup for plug-in [oracle] failed with error [null] and exit code [102], Exiting!

[gert_leunis]

Hi,

Where you able to solve the issue?

Thanks!

Kind regards...

[mailers12]

We have the same problem with the hana plug-in: SCF-00074: Cleanup for plug-in [hana] failed with error [null] and exit code [1], Exiting!

Any one any idee?