Hi,
Can you run this command/cli on your dfm server and find what is the ip address configured and change the same.
[root@vmlnx221-118 ~]# dfm host get <filername-or-id>
Host: filer.name.domain
Login: root
Password: ********
Login Protocol: rsh
Preferred IP address 1:
Preferred IP address 2:
Primary IP Address: 10.x.x.x.
Remote Platform Management IP Address:
Console Terminal Server Address:
Host CPU Too Busy Threshold (%): 95
Host CPU Busy Threshold Interval: 00:15:00
Ping Method: echo_snmp
Administration Transport: http
NDMP Login: root
NDMP Password: ********
Administration Port: 80
Performance Advisor Transport: httpOnly
Preferred SNMP Version: 1
Hosts.equiv Enabled: No
Maximum Active Data Transfers:
Performance Advisor Data Export Enabled: No
Host vFiler Default Interface:
Primary IP Address Inconsistency Action:
Automatically collect per-client statistics: No
Host clock skew threshold: 1 minute
Host clock nearly skewed threshold: 30 seconds
[root@vmlnx221-118 ~]#
Find what is the IP address against the option named hostPrimaryAddress. DFM communicates with the filer/controller using the IP specified against this opitons.
Use dfm host set <filername-or-id> hostPrimaryAddress=<new IP address accessible via WFA/DFM>
Hope this helps and solves your issue.
Regards
adai