Data Infrastructure Management Software Discussions

Highlighted

How to hot-adding multipath?

Hi, i have a FAS3020 with a single path for each tray (shelf), and I want to add a second path. How can I perform this process?. I need know if I can plug new path with the system up.

In advanced, thank you.


3 REPLIES 3
Highlighted

How to hot-adding multipath?

What model of disk shelves do you have?

How to hot-adding multipath?

We have disk shelf ESH4 and ESH2, DS14-Mk4-FC and DS14-Mk2-FC respectively.

Thank you.

Highlighted

How to hot-adding multipath?

Ok great - go to this document

http://now.netapp.com/NOW/knowledge/docs/hardware/filer/210-00640+H0.pdf

and you will want to cable exactly as you see in the "Cabling for a Standard Active/Active Configuration" diagram so that each controller will have an "IN" connection to both shelves.  This is so that in the event of a failover there is an alternate second Fibre Channel path to the shelf. 

In general FC is very forgiving of hot plugging new paths but I have to put the disclaimer here that in your case since you have two different shelf types (one of which I think is now EOL)  you should log a case with NGS to make sure there are no known problems in this scenario with your version of ONTAP and firmware levels.

Cheers

Try the NEW Knowledgebase!
NetApp KB Site
Forums