NetApp-Harvest support for OCUM 7.2?

[LiaPenn]

Hello,

I just upgraded Oncommand Unified Manager to version 7.2RC1 and I've installed and configured NetApp-Harvest 1.3.

There was no template for OCUM 7.2x so I copied the template ocum-7.1.0.conf to ocum-7.2.0.conf hoping that this would be close enough.

This seems to work with the exception of a few high level efficiency graphs coming up empty (drill down graphs are accurate).

When will there be official support for OCUM 7.2 in NetApp Harvest?

Thanks,
Lia

[madden]

Hi @LiaPenn

I am working on an update to Harvest to add support for OCUM 7.2 and ONTAP 9.2 but in the meantime your renaming the file trick and hoping for the best would also be my recommendation.  I'll update the community when the update is available.

Chris Madden

Solution Architect - 3rd Platform - Systems Engineering NetApp EMEA (and author of Harvest)

Blog: It all begins with data

If this post resolved your issue, please help others by selecting ACCEPT AS SOLUTION or adding a KUDO or both!

[LiaPenn]

Thanks!

[LeeLevenson]

ONTAP 9.2 is GA today. I am looking forward to OCUM 7.2 support.

Lee

[PaulLemmons]

When you say "I'll update the community" can I safely assume it will be to this thread? If not could you point me to where I should be watching?

[Laszlo_Radics]

Hi,

my existing Harvest configuration kept colelcting OCUM data when I have upgraded to 7.2RC1, but stopped after the upgrade to 7.2 GA. On the other hand, the Graphana admin GUI offered to force generate templates for the new version, and I guess that is pretty much the same solution, reusing the 7.1 template for 7.2 as well.

Regards,

Laszlo

[stefanhoenig]

Hello Chris,

any news when harvest 1.4 (?) will be available? Except the general support for OCUM 7.2 (and higher) and ONTAP 9.2 (and higher), are there any other planned enhancements regarding new counters and/or dashboards for ONTAP 9.2?

Thanks in advance and any information would be appreciated.

Stefan

[madden]

Hi @stefanhoenig

I just prepared a RC release for testing that includes ONTAP 9.2 and OCUM 7.2 support.  It also has vscan added.  Prior to the GA I also want to get Fabric Pools in there, but if it proves too much work I'd rather get the release out there sooner than later.

Thanks for your patience!

Cheers,

Chris Madden

Solution Architect - 3rd Platform - Systems Engineering NetApp EMEA (and author of Harvest)

Blog: It all begins with data

If this post resolved your issue, please help others by selecting ACCEPT AS SOLUTION or adding a KUDO or both!

[LDTGT]

Would love to see this update soon, we are currently holding off our ONTAP and OCUM upgrade as we do not want to lose the Harvest metrics.

Any estimate on when we can expect this to be available?

[madden]

I am busy working on it now and expect it will post in September.  It will also include some goodies like vscan, fabric pool metrics, and the additional ability to send metrics to OCI for graphing 🙂

Cheers,

Chris Madden

Solution Architect - 3rd Platform - Systems Engineering NetApp EMEA (and author of Harvest)

Blog: It all begins with data

If this post resolved your issue, please help others by selecting ACCEPT AS SOLUTION or adding a KUDO or both!

[ds]

Hi Chris,

Is it possible for the next upgrade to add the absolute value for the  Top Volumes Capacity Drilldown

Percentage can have a use but OCUM is really bad at graphing the volume capacity evolution.

I would like to see this into Harvest since it is made for graphing and it has all the info.

Tahnks in advance, Thomas.

[VinceLH]

Hi Madden,

Our client has updated its NetApp infrastructure (5 clusters with 24 nodes in total) to Ontap 9.2.
Therefore the collects are no longer progressing.

Do you have any news about any updates for Harvest 1.4 RC/GA or any availability date? 🙂

Thanks for your response.

Best regards.

Vincent L.
FPS France

[madden]

Hi @VinceLH

The software (v1.4) is code complete and is now in the release pipeline for posting to the toolchest.  It supports ONTAP 9.2, OCUM 7.2, and also has vscan and fabric pool support added.  Until it posts to the toolchest you can also simply copy the ONTAP 9.1 template file in /opt/netapp-harvest/template/default/ to the ONTAP 9.2 naming convention, and likewise for OCUM 7.1 -> 7.2.  Later when you update to the toolchest release you'll just get the new features as well.

Hope this helps!

Cheers,

Chris Madden

[VinceLH]

Hi,

I'll do this while waiting for the release of Harvest 1.4

Thanks.
Best regards,

Vincent L.
FPS France

[lahumenik]

Hi, any news with new version support?

[slbo]

Hi, how do you await the new version, downgrade the ocum version?

Thanks