OCI 7.Xand BMC Atrium 8.X and BMC DATA PUMP 3.1.05.
2015-05-12 02:27 AM
Please, I have a customer with OCI 7.0.0 integrated with BMC Atrium 8.X and BMC DATA PUMP 3.1.05.
They are bumping in several product issues, so i'm going to propose an upgrade, but i cannot find any supportability matrix for OCI 7.1 and BMC.
In any case , i'm writing to ask your help, I have several choices:
1) Apply the latest patch the latest patch for 7.0.0 : please I need the right path on gate.onaro.com
2) install oci. 7.0.2. : I need information about the supportability matrix with bmc
3) install Oci 7.1 : I need information about the supportability matrix bmc
I' m going to customer site tomorrow. So I would like to know the best for their.
In the while , they had some problems with BMC BPPM and our snmp trap. I gathered wireshark trace, so i need your opinion if our
packets are right. In attach the WStrace and the files compiled by BPPM for our mib.
1 REPLY 1
Re: OCI 7.Xand BMC Atrium 8.X and BMC DATA PUMP 3.1.05.
2015-05-12 06:34 AM
Getting the customer off of OCI 7.0.0 is a good idea - there has been a ton of enhancements since then.
Our partner who wrote the BMC connector is working to update the support matrix within a month. However, we are fairly confident that OCI 7.1.0 or 7.0.x will not have any problems with it as it sits today - the connector is using dwh_inventory data, and the changes to that data mart have been additive, so the risk of breakage is very low