Data Infrastructure Management Software Discussions

ONTAP Harvest 1.4 and ONTAP 9.3P4



I have netapp-harvest-1.4-1 and netapp-manageability-sdk-9.3 installed on our Harvest / Grafana box (RHEL 7.2)... but I'm having issues with ONTAP 9.3 clusters collecting data.  All earlier ONTAP versions are still operating as expected.


I have no errors in /opt/netapp-harvest/log/<cluster>.log:

[2018-06-06 10:02:49] [NORMAL ] WORKER STARTED [Version: 1.4] [Conf: netapp-harvest.conf] [Poller: CLUSTER01]
[2018-06-06 10:02:49] [NORMAL ] [main] Poller will monitor a [FILER] at [CLUSTER01:443]
[2018-06-06 10:02:49] [NORMAL ] [main] Poller will use [password] authentication with username [foo] and password [**********]
[2018-06-06 10:02:50] [NORMAL ] [main] Collection of system info from [CLUSTER01] running [NetApp Release 9.3P4] successful.
[2018-06-06 10:02:50] [NORMAL ] [main] Found best-fit monitoring template (same generation and major release, minor same or less): [cdot-9.3.0.conf]
[2018-06-06 10:02:50] [NORMAL ] [main] Added and/or merged monitoring template [/opt/netapp-harvest/template/default/cdot-9.3.0.conf]
[2018-06-06 10:02:50] [NORMAL ] [main] Metrics will be submitted with graphite_root [netapp.perf.LS3.CLUSTER01]
[2018-06-06 10:02:50] [NORMAL ] [main] Using graphite_meta_metrics_root [netapp.poller.perf.LS3.CLUSTER01]
[2018-06-06 10:02:50] [NORMAL ] Creating output plugins
[2018-06-06 10:02:50] [NORMAL ] Created output plugins
[2018-06-06 10:02:50] [NORMAL ] [main] Startup complete. Polling for new data every [60] seconds.


but no data is showing up in:



I've done starts / stops / restarts mulitple times... 


I've verified the 'ontapi' credentials are working by connecting via Powershell... no capacity issues on the host.


Any suggestions?





Re: ONTAP Harvest 1.4 and ONTAP 9.3P4

Hmm....  It was working for me with 9.3Psomething and it's working with 9.4RC1.


I'm currently collecting with:



NAbox 2.4.2


Havest 1.4

Re: ONTAP Harvest 1.4 and ONTAP 9.3P4

Have you tried restarting some of the pollers for filers running older ONTAP versions, which "are still operating as expected" ?

Wondering if there is a chance that any poller you stop/start will have this issue.



A couple if test systems here with 9.3P6 working fine.



Cloud Volumes ONTAP
Review Banner
All Community Forums