Active IQ Unified Manager Discussions

OnCommand CPU AVG report

SATISH_PAMARTHI1983
2,981 Views

Hi Friends,

 

we're using OnCommand UM 5.2 version. w'd like to AVG CPU report from Oncommand. Is it possible???

As far as i know, we can get only ANY report from Oncommand and if we want AVG CPU then we need to get from CLI by logging into advanced mode and use the command sysstat -m.

 

Appreciated your sharings, if there is any way in getting the AVG CPU report from Oncommand.

 

Thanks,

Satish.

1 ACCEPTED SOLUTION

Sahana
2,972 Views

Hi

 

  1. Open the NetApp Management Console (NMC) and click Performance Advisor > Setup > Select a controller from the list > Click Data Collection > Click EditNext > Find the system in the Disable Counters column Select avg_processor_busy > Use ">" to move avg_processor_busy to the Enabled Counters column > Click Next twice and then click Finish
  2. Refer https://library.netapp.com/ecm/ecm_get_file/ECMP1217275 page 38 to know about cpu counters.
If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

1 REPLY 1

Sahana
2,973 Views

Hi

 

  1. Open the NetApp Management Console (NMC) and click Performance Advisor > Setup > Select a controller from the list > Click Data Collection > Click EditNext > Find the system in the Disable Counters column Select avg_processor_busy > Use ">" to move avg_processor_busy to the Enabled Counters column > Click Next twice and then click Finish
  2. Refer https://library.netapp.com/ecm/ecm_get_file/ECMP1217275 page 38 to know about cpu counters.
If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.
Public