Data Infrastructure Management Software Discussions

Highlighted

OnCommand System manager through firewall

Hi ALL,

does anyone know which firewall ports are used by OnCommand System Manager?

need to manage a 2020 filer through an internal firewall

thx

5 REPLIES 5
Highlighted

Re: OnCommand System manager through firewall

I don't have the documentation handy to check but off the top of my head, I'd say SNMP for arrays discovery/registration and then http and/or https depending on your FAS administration settings.

Hope this helps.

Highlighted

Re: OnCommand System manager through firewall

Hi francoi1,

think  there must be more 😉

http and snmp is open; i do not use ssl for filer view

Highlighted

Re: OnCommand System manager through firewall

Check out:

http://now.netapp.com/NOW/knowledge/docs/oncommand/relcore50/pdfs/opsmgr.pdf

Page 303

For communication to the Storage System from the Ops Mgr Server:

TCP:  80,443,514,22,23

UDP:  161

For communiction to Host Agents:

TCP:  4092,4093

For communication to OSSV Agents:

TCP:  10000

UDP:  161

Highlighted

Re: OnCommand System manager through firewall

The port numbers used by OnCommand System Manager to communicate with Storage Controller are as follows

80 (HTTP)

443 (HTTPS)

25 (SNMP)

We are working towards including this information in the documentation as well.

Thanks,

Karthik

Highlighted

Re: OnCommand System manager through firewall

Sir,

you probably wanted to write PORT 161 (UDP) for SNMP protocol. I think you confused SNMP with SMTP (which runs on port 25 TCP and is totally unrelated).

 

Hope this helps,

 

Check out the KB!
NetApp Insights To Action
All Community Forums