Data Infrastructure Management Software Discussions

Highlighted

Oncommand 3.1RC1 on windows 2008 64bit

Vfiler "Manage" tab is missing in oncommand 3.1RC1 installed on windows 2008 64bit

12 REPLIES 12
Highlighted

Re: Oncommand 3.1RC1 on windows 2008 64bit

Are you referring to this (captured from my 3.1RC1 instance on Windows 7 x64)?

Thanks,

Kevin

Highlighted

Re: Oncommand 3.1RC1 on windows 2008 64bit

No,

PFB, once you click on vfiler, “manage” tab is missing.

Below snap is taken from 2.x(2X3)

Regards,

Raghu.

Highlighted

Re: Oncommand 3.1RC1 on windows 2008 64bit

I recall that the vFiler manage button was removed in OCSM 2.1 GA.

Kevin

Highlighted

Re: Oncommand 3.1RC1 on windows 2008 64bit

I have a question regarding NetApp OnCommand System Manager.

Can this tool be installed on vCenter only or it can be installed on any server?

Highlighted

Re: Oncommand 3.1RC1 on windows 2008 64bit

Hi,

Then how to manage Vfiler in 3.1RC1..

Regards,

Raghu.

Highlighted

Re: Oncommand 3.1RC1 on windows 2008 64bit

Raghu

I guess you were using a Beta version of System Manager 2.x. This feature never made it to a release.

-kunal

Highlighted

Re: Oncommand 3.1RC1 on windows 2008 64bit

But is there any other way to manage Vfilers other than cmdline.

Regards,

Raghu.

Highlighted

Re: Oncommand 3.1RC1 on windows 2008 64bit

Not in my knowledge.

-kunal

Highlighted

Re: Oncommand 3.1RC1 on windows 2008 64bit

OCSM can be installed on a range of Operating Systems, although ESX is not one of them.

Here is the list as contained in the 3.1RC1 Installation Guide:

https://library.netapp.com/ecm/ecm_download_file/ECMP1354559

• Windows XP

• Windows Vista

• Windows 7

• Windows 8

• Windows Server 2003

• Windows Server 2008

• Windows Server 2008 R2

• Windows Server 2012

• Red Hat Enterprise Linux 5 or 6

• SUSE Linux Enterprise Server 11

Thanks,

Kevin

Highlighted

Re: Oncommand 3.1RC1 on windows 2008 64bit

Yes, I tested it and it worked fine .

Where can I find each disk size? I only see total disks but I don't see each disk size in ONCommand System admin.

I am new to this tool or NetApp storage.

Highlighted

Re: Oncommand 3.1RC1 on windows 2008 64bit

You will find the size of the disks under Storage => Disks.

Thanks,

Kevin

Highlighted

Re: Oncommand 3.1RC1 on windows 2008 64bit

I have the same question . I can find disks but they show ATA and SAS different type disks and different size 827GB and 401GB.

How can I know the exactl hard disk size if I don't have a hardware inventory list. I just assume 900GB each or 500GB each?

Another questions:

How to mount a new added host in the vmware cluste to all datastores on NetApp Filer FAS204 to r?

Check out the KB!
NetApp Insights To Action
All Community Forums