Active IQ Unified Manager Discussions

Trouble connecting to PA 4.0.2D2 data source with WFA 2.0.1

rustyb
4,353 Views

When trying to add PA 4.0.x as a data source, I recieve the error "Failed connecting to host <host/IP> using both http and https"

My PA server is the same as my OM server... However, my OCUM data source is working just fine.

Not sure if there is something I'm missing here.

C:\Documents and Settings\z418145>dfm host diag dfmlab2

Network Connectivity
IP Address             113.132.195.79
Network                (discovery disabled)
DNS Aliases            DFMLAB2.fclab.verizon.com
DNS Addresses          113.132.195.79
SNMP Version in Use    SNMPv1
SNMPv1                 Failed: Timeout (No such file or directory) (Unknown error)
SNMP Community         public
SNMPv3                 Failed: No SNMPv3 username specified.

SNMPv3 Auth Protocol
SNMPv3 Privacy Enabled No
SNMPv3 Username
ICMP Echo              Passed (0 ms)
HTTP                   Passed (0 ms)
Host Agent Connect     Failed (transport http; port 4092)

1 ACCEPTED SOLUTION

sinhaa
4,353 Views

@

I've tried this a few times without success...  Is there any way to extend the timeout for the collection to a higher value or any other suggestions?

------

You can edit this Data source, it has a field Timeout (sec) . By default it is shown as 600, you can increase this value and try it.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

5 REPLIES 5

abhit
4,353 Views

For Performance Advisor, have you created an OnCommand Unified Manager user account

with a minimum role of GlobalRead? See the OnCommand Unified Manager Online Help for details.

-Abhi

sinhaa
4,353 Views

@ I recieve the error "Failed connecting to host <host/IP> using both http and https"

----

Are u trying to connect using the DB credentials that u used in OCUM Data Source acquisition even for Performance Data acquisition? PA data acquisition needs login credentials to the OCUM server and not DB login credentials.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

rustyb
4,353 Views

You are correct.  I was using the DB creds created for OM Data Source acq.

I have moved passed this error and onto another however...  It looks like PA acquisition is taking >600 seconds and timing out. -

"Command '$Uri = @($input)[0] ; C:\Program` Files\NetApp\WFA\jboss\..\PoSH\profile.ps1;Invoke-WfaCommand -Script './performance3814374573430959796.ps1 '' timed out"

I've tried this a few times without success...  Is there any way to extend the timeout for the collection to a higher value or any other suggestions?

Thanks!

sinhaa
4,354 Views

@

I've tried this a few times without success...  Is there any way to extend the timeout for the collection to a higher value or any other suggestions?

------

You can edit this Data source, it has a field Timeout (sec) . By default it is shown as 600, you can increase this value and try it.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

rustyb
4,353 Views

That did it!...  I should have seen that.  Appreciate all the help!

Public