Data Infrastructure Management Software Discussions

WFA E-Series Pack using SANtricity Web Services Proxy (2.X)

The WFA E-Series Package will assist customers with provisioning and configuration of NetApp® E-Series platform environments in conjunction with the E-Series Web Services Proxy and SANtricity PowerShell Toolkit.

 

The following software must installed and configured in the environment in order to use WFA E-Series package:

 

  • SANtricity® 11.10 or later
  • SANtricity Web Services Proxy 1.1 or later
  • SANtricity PowerShell Toolkit 1.0 or later
  • PowerShell 3.0

The software listed above is found on the NetApp Support website (http://support.netapp.com/).

 

This version supersedes previous 1.X versions which did not utilize the SANtricity PowerShell Toolkit.

 

UPDATE: Version 2.1.1 addresses new code in Refresh WFA Data Source to more cleanly use Invoke-RestMethod in PowerShell 3.0.  Documentation has been updated to address WFA 3.0 username/password changes.

3 REPLIES 3
Highlighted

Re: WFA E-Series Pack using SANtricity Web Services Proxy (2.X)

hey ,

 

I am getting the following error when i a trying to acquire the eseries proxy server on WFA. I get an error message saying it is not able to run a certain cmdlet. is there a workaround or a solution to this

 

 

2016-02-23 15:09:34,312 INFO  [com.netapp.wfa.job.backend.JobsExecutionInterceptor] (Thread-652 (HornetQ-client-global-threads-2035890968)) Job CacheJob{, dataSourceId=DataSourceInfo{id=1, name='LOCAL E-series', connectionDetails=ConnectionDetails{id=1, ip='10.10.16.112', port=8080, userName='eseries', password='******', databaseName='null', timeoutInSeconds=600, lastUpdateTime=0}, dataProviderType=DataProviderType{id=13, productType='E-Series Web Services', productVersion='2.0', scheme='eseries'}}, schemeId=Scheme{id=7, name='eseries'}, dataSourceName='LOCAL E-series', schemeName='eseries'} started
2016-02-23 15:09:55,317 INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (default task-21) LOCAL E-series:Getting storage system information from Web Services Proxy ...
2016-02-23 15:09:58,521 INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (default task-28) LOCAL E-series:Getting hardware information from storage system c2fe32fd-393a-4b82-8205-4e4a6bdc73dc ...
2016-02-23 15:09:59,754 INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (default task-29) LOCAL E-series:Getting volume group and disk pool information from storage system c2fe32fd-393a-4b82-8205-4e4a6bdc73dc ...
2016-02-23 15:09:59,941 INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (default task-31) LOCAL E-series:Getting volume information from storage system c2fe32fd-393a-4b82-8205-4e4a6bdc73dc ...
2016-02-23 15:10:00,300 INFO  [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (default task-1) LOCAL E-series:Getting snapshot image information from storage system c2fe32fd-393a-4b82-8205-4e4a6bdc73dc ...
2016-02-23 15:10:00,518 ERROR [com.netapp.wfa.command.execution.instance.impl.ExecutionInstanceDaoImpl] (default task-3) LOCAL E-series:ERROR: Could not get snapshot image information from E-Series Web Proxy: The term 'Get-NeSnapshot' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
2016-02-23 15:10:00,643 ERROR [com.netapp.wfa.job.backend.JobsExecutionInterceptor] (Thread-652 (HornetQ-client-global-threads-2035890968)) Job CacheJob{, dataSourceId=DataSourceInfo{id=1, name='LOCAL E-series', connectionDetails=ConnectionDetails{id=1, ip='10.10.16.112', port=8080, userName='eseries', password='******', databaseName='null', timeoutInSeconds=600, lastUpdateTime=0}, dataProviderType=DataProviderType{id=13, productType='E-Series Web Services', productVersion='2.0', scheme='eseries'}}, schemeId=Scheme{id=7, name='eseries'}, dataSourceName='LOCAL E-series', schemeName='eseries'} failed: com.netapp.wfa.cache.execution.CacheException: Error running data acquisition script: ERROR: Could not get snapshot image information from E-Series Web Proxy: The term 'Get-NeSnapshot' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.

 

Highlighted

Re: WFA E-Series Pack using SANtricity Web Services Proxy (2.X)

It's trying to make a call to the SANtricity PowerShell Toolkit and not finding it.  I noticed you have another question out to that team.  I would resolve that first and then try this again.

Highlighted

Re: WFA E-Series Pack using SANtricity Web Services Proxy (2.X)

Does this WFA E-Series Pack work with the latest NetApp Santricity Powershell Toolkit? What about the latest WFA? IF not, when will it be updated?

Check out the KB!
Knowledge Base
All Community Forums